Electric Hammer Tools
Forged Hammer Tools
Scaling ChiselsUsed for: Removing scale, rust and concrete splatter |
|
Cold ChiselsUsed for: Edging, chipping and channeling concrete, masonry or brick |
||||||||
 |
Fits These
Hammers
|
Description
|
Part
No.
|
Price
|
 |
Fits These
Hammers
|
Description
|
Part
No.
|
Price
|
|
| Spline | 12" OAL x 2" | SC-12S | $42.00  |
Spline | 12" OAL X 1" | CC-12S | $23.00 |
|||
| 18" OAL X 2" | SC-18S | 46.00 |
18" OAL X 1" | CC-18S | 32.00 |
|||||
| SDS-max | 12" OAL x 2" | SC-12MX | 45.00 |
SDS-max | 12" OAL X 1" | CC-12MX | 30.00 |
|||
| 12" OAL x 3" | SC-312MX | 69.00 |
18" OAL X 1" | CC-18MX | 35.00 |
|||||
| 18" OAL x 2" | SC-18MX | 51.00 |
SDS+ | 10" OAL X 3/4" | CC-12DS | 31.00 |
||||
| SDS+ | 10" OAL X 1 1/2" | SC-12DS | 42.00 |
3/4" HEX | 12" OAL X 1" | CC-12HX | 22.00 |
|||
| 3/4" HEX | 12" OAL X 2" | SC-12HX | 41.00 |
18" OAL X 1" | CC-18HX | 29.00 |
||||
| 12" OAL X 3" | SC-312HX | 44.00 |
||||||||
Bull Points or Moil PointsUsed for: Breaking up concrete, brick, asphalt, etc.; Light demolition applications; Starting holes in concrete slabs |
Bushing ToolsUsed for: Roughing up concrete surface prior to applying a surface finish; Concrete surface removal to produce a rough exterior finish |
|||||||||
 |
Fits These
Hammers
|
Description
|
Part
No.
|
Price
|
 |
Fits These Hammers
|
Description
|
Part
No.
|
Price
|
|
| Spline | 12" OAL | BP-12S | $23.00 |
Spline | 1 pc Bushing Tool | BT-16S | $110.00 |
|||
| 18" OAL | BP-18S | 32.00 |
SDS-max | 1 pc Bushing Tool | BT-16MX | 114.00 |
||||
| SDS-max | 12" OAL | BP-12MX | 28.00 |
3/4" HEX | 1 pc Bushing Tool | BT-16HX | 110.00 |
|||
| 18" OAL | BP-18MX | 33.00 |
16 Pt. Bushing Head | BH-16 | 46.00 |
|||||
| SDS+ | 10" OAL | BP-12DS | 31.00 |
Spline | Bushing Head Shank | BS-8S | 25.00 |
|||
| 3/4" HEX | 12" OAL | BP-12HX | 22.00 |
SDS-max | Bushing Head Shank | BS-8MX | 30.00 |
|||
| 18" OAL | BP-18HX | 29.00 |
3/4" HEX | Bush Shank | BS-8HX | 25.00 |
||||
Slotting ChiselUsed for: Slotting in concrete and masonry; Breaking web between predrilled holes in concrete to make large opening |
Carbide Bushing ToolsHave 25 carbide points |
|||||||||
 |
Fits These
Hammers
|
Description
|
Part
No.
|
Price
|
 |
Fits These
Hammers
|
Description
|
Part
No.
|
Price
|
|
| Spline | 12" OAL x 1 1/8" | CR-12S | $46.00 |
Spline | 1 pc Bushing Tool | BT-25CS | $330.00 |
|||
| SDS-max | 12" OAL x 1 1/8" | CR-12MX | 52.00 |
SDS-max | 1 pc Bushing Tool | BT-25CMX | 336.00 |
|||
| 3/4" HEX | 1 pc Bushing Tool | BT-25CHX | 330.00 |
|||||||
Clay SpadeUsed for: Digging clay, dirt, hard-packed gravel, shale, etc. |
Mortar ChiselsUsed for: Cleaning out old mortar between bricks and masonry prior to tuck pointing or caulking; Cutting narrow channels |
|||||||||
 |
Fits These
Hammers
|
Description
|
Part
No.
|
Price
|
 |
Fits These
Hammers
|
Description
|
Part
No.
|
Price
|
|
| 3/4" HEX | 4 1/2 x 6 x 17" | CS-HX | $112.00 |
Spline | 15" OAL x 1 1/8" | MC-15S | $44.00 |
|||
| SDS-max | 4 1/4 x 5 1/4 x 15 1/2" | CS-MX | 139.00 |
SDS-max | 15" OAL x 1 1/8" | MC-15MX | 51.00 |
|||
Asphalt CutterUsed for: Cutting asphalt or hard ground - not for concrete |
Ground Rod DriversUsed for: Driving electrical grounding rods into earth |
|||||||||
 |
Fits These
Hammers
|
Description
|
Part
No.
|
Price
|
|
Fits These
Hammers
|
Description
|
Part
No.
|
Price
|
|
| 3/4" HEX | 3 1/2 x 4 1/2 x 17" | AC-HX | $151.00 |
Spline | for 5/8-3/4" rebar | DR-S | $114.00 |
|||
| SDS-max | 4 x 4 1/2 x 15 1/2" | AC-MX | 167.00 |
SDS-max | for 5/8-3/4" rebar | DR-MX | 119.00 |
|||
| 3/4" HEX | for 5/8-3/4" rebar | DR-HX | 114.00 |
|||||||
