DOWN-THE-HOLE HAMMERS

6" Heavy Duty Series Hammers

The Mincon hammers maintain excellent operating pressure over an extended service life and overall is the tool you require to get the maximum out of all your equipment. Mincon products are all manufactured in house (Ireland), and processes are carried out under one roof. This guarantees that the quality you expect is always delivered.

Applications include blast hole and construction

** FREE ground shipping to non-dealers within the Continental United States

Design Highlights:

  • Valveless operation to maximize energy output, provide efficient air utilitzation and reduce service requirements
  • Extra air-flow system allows for better hole cleaning in troublesome holes
  • Reversible hardened wear sleeve for optimum wear resistance even in the most abrasive conditions
  • Multi-start threads on back head and chuck ensure easy coupling/uncoupling of hammer
  • Unique internal mount system gives positive make-up and eliminates the need for wear shims and special assembly tools
  • All critical internal components are heat treatedunder strict control to maximize tool longevity
  • An overall cost-effective and user-friendly tool for use in the most demanding conditions

Mincon Hammers

Mincon MC65 Hammer

The Mincon MC65 is a superior but versatile hammer, specifically built for drilling applications where high penetration speeds are vitally important.  It's unique design concept provides much greater impact energy and ultimate drilling performance for absolute maximum productivity in almost all ground conditions. 

The Mincon MC series drill bits do not use foot valves (blow tubes) and therefore any problems previously associated with them are completely eradicated.  The multi-splined, full length drive bits are designed to extend the wear life of the the bit shank.

Like all Mincon DTH hammers, the Mincon MC65 maintains an excellent operating pressure over an extended service life and overall is the tool you require to get the maximum out of all your equipment. Mincon products are all manufactured in house (Ireland) and all processes are carried out under one roof. This guarantees that the quality you expect is always delivered.

Design Highlights

  • Patented shank design is fully supported within the chuck throughout the stroke providing maximum protection against shanking.
  • Hammer design eliminates the foot valve from the drill bit.
  • Patented features maximize energy output and reduce service requirements
  • Extremely efficient air exhaust provide excellent hole cleaning and allows for drilling against very large volumes of water.
  • Valveless, high frequency design ensures smooth operation
  • Reversible hardened wear sleeve for optimum wear resistance even in the most abrasive conditions
  • Unique internal mount system eliminates the need for wear shims and special assembly tools
  • All critical internal components are heat treated under strict control to maximize tool longevity
  • An overall cost-effective and user friendly tool for use in the most demanding conditions

Applications:

  • Blast hole
  • Construction
ModelPart No.Price
Mincon MC65 Hammer MB601AS04 $6,750.00
Mincon MC65 Hammer - Button Back Head MB601AS04B $6,850.00  
Mincon MC65 Hammer - Backreamer Back Head MB601AS04BR QUOTE  

*** FREE shipping within continental United States for non-dealers

Specifications
Outside Diameter (in) 5.75
Minimum Bit Size (in) 6.25
Spanner Flat Size (in) 4
Hammer Length (in) 40.6
Hammer Weight (lbs) 225
Piston Weight (lbs) 46
Wear Sleeve Reverse Limit   5.310
Wear Sleeve Discard Limit (in) 5.060
Back Head Thread   3-1/2" API Reg Pin
Consumables
Bit Shank Type Mincon MC61
Specifications
Outside Diameter (in) 5.75
Minimum Bit Size (in) 6.25
Spanner Flat Size (in) 4
Hammer Length (in) 40.6
Hammer Weight (lbs) 225
Piston Weight (lbs) 46
Wear Sleeve Reverse Limit   5.310
Wear Sleeve Discard Limit (in) 5.060
Back Head Thread   3-1/2" API Reg Pin
Accessories
O Ring Kit MD625OK01 $21.39
Rebuild Kit MB601RB04 $3,905.49
Rebuild Kit with Buttons MB601RB04B $4,096.60
Rebuild Kit with Backreamer MB601RB04BR $5,000.12
Rebuild Kit with Backreamer Bushing MB601RB04BRB $4,039.90

Mincon 6BH Hammer

The Mincon 6BH has proven itself the best hammer on the market in all kinds of demanding blasthole conditions.  Through unique manufacturing processes, the life of internal components is prolonged allowing for multiple rebuilds of the hammer in abrasive conditions.

Like all Mincon DTH hammers, the Mincon 6BH maintains an excellent operating pressure over an extended service life and overall is the tool you require to get the maximum out of all your equipment.  Mincon products are all manufactured in house (Ireland) and all processes are carried out under one roof.  This guarantees that the quality you expect is always delivered.

Design Highlights

  • Patented features maximize energy output and reduce service requirements
  • Multiple splined shank reduces possibility of shankage.
  • Unique manufacturing processes extend internal components life allowing for multiple rebuilds in abrasive conditions.
  • Valveless operation to maximize energy output, provide efficient air utilization and reduce service requirements.
  • Extra air-flow system allows for better hole cleaning in troublesome holes.
  • Reversible hardened wear sleeve for optimum wear resistance even in the most abrasive conditions
  • Multi-start threads on back head and chuck ensure easy coupling/uncoupling of hammer
  • Unique internal mount system eliminates the need for wear shims and special assembly tools
  • All critical internal components are heat treated under strict control to maximize tool longevity
  • An overall cost-effective and user friendly tool for use in the most demanding conditions

Applications:

  • Blasthole
  • Construction
ModelPart No.Price
Mincon 6BH Hammer MB601AS01 $6,425.00
Mincon 6BH Hammer - Button Back Head MB601AS01B $6,530.00
Mincon 6BH Hammer - Backreamer Back Head MB601AS01BR QUOTE

*** FREE shipping within continental United States for non-dealers

Specifications
Outside Diameter (in) 5.75
Minimum Bit Size (in) 6.25
Spanner Flat Size (in) 4
Hammer Length (in) 40.7
Hammer Weight (lbs) 216
Piston Weight (lbs) 44
Wear Sleeve Reverse Limit   5.310
Wear Sleeve Discard Limit (in) 5.060
Back Head Thread   3-1/2" API Reg Pin
Consumables
Bit Shank Type Atlas Copco QL 60
Consumables
Bit Shank Type Atlas Copco QL 60
Specifications
Outside Diameter (in) 5.75
Minimum Bit Size (in) 6.25
Spanner Flat Size (in) 4
Hammer Length (in) 40.7
Hammer Weight (lbs) 216
Piston Weight (lbs) 44
Wear Sleeve Reverse Limit   5.310
Wear Sleeve Discard Limit (in) 5.060
Back Head Thread   3-1/2" API Reg Pin
Accessories
O Ring Kit MD625OK01 $21.39
Rebuild Kit MB601RB01 $3,905.49
Rebuild Kit with Buttons MB601RB01B $4,096.60
Rebuild Kit with Backreamer MB601RB01BR $4,747.74
Rebuild Kit with Backreamer Bushing MB601RB01BRB $3,768.32

Mincon 6BHSD6 Hammer

The Mincon 6BHSD6 has proven itself the best hammer on the market in all kinds of demanding blasthole conditions.  Through unique manufacturing processes, the life of internal components is prolonged allowing for multiple rebuilds of the hammer in abrasive conditions.

Like all Mincon DTH hammers, the Mincon 6DHSD6 maintains an excellent operating pressure over an extended service life and overall is the tool you require to get the maximum out of all your equipment.  Mincon products are all manufactured in house (Ireland) and all processes are carried out under one roof.  This guarantees that the quality you expect is always delivered.

Design Highlights

  • Patented features maximize energy output and reduce service requirements
  • Multiple splined shank reduces possibility of shankage
  • Unique manufacturing processes extend internal components life allowing for multiple rebuilds in abrasive conditions
  • Valveless operation to maximize energy output, provide efficient air utilization and reduce service requirements
  • Extra air-flow system allows for better hole cleaning in troublesome holes
  • Reversible hardened wear sleeve for optimum wear resistance even in the most abrasive conditions
  • Multi-start threads on back head and chuck ensure easy coupling/uncoupling of hammer
  • Unique internal mount system eliminates the need for wear shims and special assembly tools
  • All critical internal components are heat treated under strict control to maximize tool longevity
  • An overall cost-effective and user friendly tool for use in the most demanding conditions

Applications:

  • Blasthole
  • Construction
ModelPart No.Price
Mincon 6BHSD6 Hammer MB601AS02 $6,430.00
Mincon 6BHSD6 Hammer - Button Back Head MB601AS02B $6,530.00
Mincon 6BHSD6 Hammer - Backreamer Back Head MB601AS02BR QUOTE

*** FREE shipping within continental United States for non-dealers

Specifications
Outside Diameter (in) 5.75
Minimum Bit Size (in) 6.25
Spanner Flat Size (in) 4
Hammer Length (in) 40.7
Hammer Weight (lbs) 216
Piston Weight (lbs) 44
Wear Sleeve Reverse Limit   5.310
Wear Sleeve Discard Limit (in) 5.060
Back Head Thread   3-1/2" API Reg Pin
Consumables
Bit Shank Type Sandvik SD6 / 5315
Specifications
Outside Diameter (in) 5.75
Minimum Bit Size (in) 6.25
Spanner Flat Size (in) 4
Hammer Length (in) 40.7
Hammer Weight (lbs) 216
Piston Weight (lbs) 44
Wear Sleeve Reverse Limit   5.310
Wear Sleeve Discard Limit (in) 5.060
Back Head Thread   3-1/2" API Reg Pin
Accessories
O Ring Kit MD625OK01 $21.39
Rebuild Kit MB601RB01 $3,905.49
Rebuild Kit with Buttons MB601RB03B $4,219.98
Rebuild Kit with Backreamer MB601RB03BR $4,876.26
Rebuild Kit with Backreamer Bushing MB601RB03BRB $3,891.70

Mincon 6BH 2 Piece Chuck Hammer

The Mincon 6BH-2 Piece Chuck has proven itself the best hammer on market in all kinds of demanding blasthole conditions.  Through unique manufacturing processes, the life of internal components is prolonged allowing for multiple rebuilds of the hammer in abrasive conditions.

Like all Mincon DTH hammers, the Mincon 6BH-2 Piece Chuck maintains an excellent operating pressure over an extended service life and overall is the tool you require to get the maximum out of all your equipment.  Mincon products are all manufactured in house (Ireland) and all processes are carried out under one roof.  This guarantees that the quality you expect is always delivered.

Design Highlights

  • Patented features maximize energy output and reduce service requirements
  • Multiple splined shank reduces the possibility of shankage.
  • Unique manufacturing processes extend internal components life allowing for multiple rebuilds in abrasive conditions.
  • Valveless operation to maximize energy output, provide efficient air utilization and reduce service requirements.
  • Extra air-flow system allows for better hole cleaning in troublesome holes
  • Reversible hardened wear sleeve for optimum wear resistance even in the most abrasive conditions
  • Multi-start threads on back head and chuck ensure easy coupling/uncoupling of hammer
  • Unique internal mount system eliminates the need for wear shims and special assembly tools
  • All critical internal components are heat treated under strict control to maximize tool longevity
  • An overall cost-effective and user friendly tool for use in the most demanding conditions

Applications:

  • Blasthole
  • Construction
ModelPart No.Price
Mincon 6BH-2 Piece Chuck Hammer MB601AS06 CALL
Mincon 6BH-2 Piece Chuck Hammer with Button Back Head MB601AS06B CALL
Mincon 6BH-2 Piece Chuck Hammer with Backreamer Back Head MB601AS06BR CALL

*** FREE shipping within continental United States for non-dealers

Specifications
Outside Diameter (in) 5.75
Minimum Bit Size (in) 6.25
Spanner Flat Size (in) 4
Hammer Length (in) 40.7
Hammer Weight (lbs) 216
Piston Weight (lbs) 44
Wear Sleeve Reverse Limit   5.310
Wear Sleeve Discard Limit (in) 5.060
Back Head Thread   3-1/2" API Reg Pin
Consumables
Bit Shank Type Atlas Copco QL 60
Specifications
Outside Diameter (in) 5.75
Minimum Bit Size (in) 6.25
Spanner Flat Size (in) 4
Hammer Length (in) 40.7
Hammer Weight (lbs) 216
Piston Weight (lbs) 44
Wear Sleeve Reverse Limit   5.310
Wear Sleeve Discard Limit (in) 5.060
Back Head Thread   3-1/2" API Reg Pin
Accessories
O Ring Kit MD625OK01 $21.39
Rebuild Kit MB601RB06 $4,307.14
Rebuild Kit with Buttons MB601RB06B $4,450.00
Rebuild Kit with Backreamer MB601RB06BR CALL
Rebuild Kit with Backreamer Bushing MB601RB06BRB $zzcp1

Mincon 6DH360 Hammer

The Mincon 6DH360 has proven itself the best hammer on the market in all kinds of demanding conditions and applications.  It is still the fastest, smoothest, longest lasting, and reliable hammer around.  Now with new performance enhancements, the Mincon 6DH360 can provide better drilling in soft ground conditions and against large volumes of water.

Like all Mincon DTH hammers, the Mincon 6DH360 maintains an excellent operating pressure over an extended service life and overall is the tool you require to get the maximum out of all your equipment. Mincon produces are all manufactured in house (Ireland) and all processes are carried out under the one roof. This guarantees that the quality you expect is always delivered.

Design Highlights

  • Design allows for increased penetration against large volumes of water, and also allows for the introduction of more water in unstable conditions
  • Unique manufacturing processes extend internal components life allowing for multiple rebuilds in abrasive conditions
  • Valveless operaton to maximize energy output, provide efficient air utilization and reduce service requirements
  • Extra air-flow system allows for better hole cleaning in troublesome holes
  • Reversible hardened wear sleeve for optimum wear resistance even in the most abrasive conditions
  • Multi-start threads on back head and chuck ensure wasy coupling/uncoupling of hammer
  • Unique internal mount system eliminates the need for wear shims and special assembly tools
  • All critical internal components are heat treated under strict control to maximize tool longevity
  • An overall cost-effective and user-friendly tool for use in the most demanding conditions

Applications:

  • Water Well
  • Exploration
  • Construction
ModelPart No.Price
Mincon 6DH360 Hammer M3601AS01 $5,570.00
Mincon 6DH360 Hammer - Button Back Head M3601AS01B $5,670.00

*** FREE shipping within continental United States for non-dealers

Specifications

Outside Diameter (in) 5.5
Minimum Bit Size (in) 6
Spanner Flat Size (in) 4
Hammer Length (in) 44.6
Hammer Weight (lbs) 210
Piston Weight (lbs) 44
Wear Sleeve Reverse Limit   5.310
Wear Sleeve Discard Limit (in) 5.060
Back Head Thread   3-1/2" API Reg Pin

Consumables

Bit Shank Type Atlas Copcp DHD 360

Specifications

Outside Diameter (in) 5.5
Minimum Bit Size (in) 6
Spanner Flat Size (in) 4
Hammer Length (in) 44.6
Hammer Weight (lbs) 210
Piston Weight (lbs) 44
Wear Sleeve Reverse Limit   5.310
Wear Sleeve Discard Limit (in) 5.060
Back Head Thread   3-1/2" API Reg Pin

Accessories

O Ring Kit MD625OK01 $21.39
Rebuild Kit M3601RB06 $3,450.30
Rebuild Kit with Buttons M3601RB06B $3,625.61

Mincon XP60 Hammer

The "Next Generation" of Mincon Rockdrill hammers has redefined the level of performance you expect from a DTH hammer.  The New "XP-Xtreme Performance" range offers significantly increased penetration and smoothness of operation, all with the quality and longevity you have come to expect from Mincon Products.

Like all Mincon DTH hammers, the Mincon XP60 maintains an excellent operating pressure over an extended service life and overall is the tool you require to get the maximum out of all your equipment. Mincon products are all manufactured in house (Ireland) and all processes are carried out under the one roof. This guarantees that the quality you expect is always delivered.

Design Highlights

  • Patented locking mechanism allows for an increased bore without sacrificing on wear limits or increasing the outside diameter of the hammer.  Design also eliminates the need for compression rings, wear shims and special assembly tools.
  • Design allows for excellent performance when drilling against large volumes of water.
  • Design allows for easy servicing of the check valve choke without having to open the back head to wear sleeve connection
  • Twelve spline shank reduces the possibility of shanking
  • Smoother operation than previous Mincon models through better internal mounting and increased penetration rates
  • Reversible hardened wear sleeve for optimum wear resistance even in the most abrasive conditions
  • Multi-start threads on back head and chuck ensure easy coupling/uncoupling of hammer
  • All critical internal components are heat treated under strict control to maximize tool longevity
  • An overall cost-effective and user-friendly tool for use in the most demanding conditions

Applications:

  • Blast hole
  • Water Well
  • Environmental
  • Exploration
  • Construction
ModelPart No.Price
Mincon XP60 Hammer MP601AS01 $5,925.00

*** FREE shipping within continental United States for non-dealers

Specifications

Outside Diameter (in) 5.5
Minimum Bit Size (in) 6
Spanner Flat Size (in) 4
Hammer Length (in) 40.2
Hammer Weight (lbs) 190
Piston Weight (lbs) 48
Wear Sleeve Reverse Limit   5.310
Wear Sleeve Discard Limit (in) 5.060
Back Head Thread   3-1/2" API Reg Pin

Consumables

Bit Shank Type Atlas Copco QL 60

Specifications

Outside Diameter (in) 5.5
Minimum Bit Size (in) 6
Spanner Flat Size (in) 4
Hammer Length (in) 40.2
Hammer Weight (lbs) 190
Piston Weight (lbs) 48
Wear Sleeve Reverse Limit   5.310
Wear Sleeve Discard Limit (in) 5.060
Back Head Thread   3-1/2" API Reg Pin

Accessories

O Ring Kit MP625OK01 $8.40
Rebuild Kit MP601RB01 $3,318.49