Masonry Drill Bits - Straight Shank

Ram Tip Rotary/PercussionDesigned for use in lightweight, rotating-vibrating hammers, but it can be used equally well in standard drill motors as a rotary bit.  A special hard, tough cardbide cutter is precisely located for maximum support and strength.
Diameter (In.) Overall Length (inches) Drilling Depth (inches) Part No. Price
Point Shank
1164" 1164" 3" 1 78" RT-1-3 $6.40
18" 18" 3" 178" RT-2-3 $3.20
316" 316" 3" 1 78" RT-3-3 $4.00
316" 316" 4" 2 28" RT-3-4 $4.80
316" 316" 6" 4 12" RT-3-6 $6.40
316" 316" 8" 6" RT-3-8 $8.00
732" 14" 8 12" 6 12" RT-2-8 $8.00
14" 14" 4" 2 14" RT-4-4 $5.60
14" 14" 6" 3 34" RT-4-6 $6.40
14" 14" 8" 6" RT-4-8 $10.40
14" 14" 12" 10" RT-4-12 $12.80
14" 14" 18" 16" RT-4-18 $21.60
14" 14" 24" 22" RT-4-24 $26.40
516" 14" 4" 2 12" RT-5-4 $7.20
516" 14" 6" 4" RT-5-6 $7.60
516" 14" 12" 10" RT-5-12 $15.20
516" 14" 18" 16" RT-5-18 $22.40
38" 38" 4" 2 12" RT-6-4 $8.00
38" 14" 4" 2 12" RT-6-4A $8.00
38" 38" 6" 4" RT-6-6 $8.80
38" 14" 6" 4" RT-6-6A $8.80
38" 38" 12" 10" RT-6-12 $16.80
38" 38" 18" 16" RT-6-18 $22.40
38" 38" 24" 22" RT-6-24 $30.40
716" 14" 4" 2 12" RT-7-4 $8.40
716" 14" 6" 4" RT-7-6 $9.20
12" 38" 4" 2 12" RT-8-4 $8.80
12" 38" 6" 4" RT-8-6 $9.60
12" 14" 6" 4" RT-8-6A $9.60
12" 38" 14" 12" RT-8-14 $20.80
12" 38" 18" 16" RT-8-18 $28.80
12" 38" 24" 22" RT-8-24 $33.60
916" 38" 6" 4" RT-9-6 $12.00
58" 12" 6" 4" RT-10-6 $13.60
58" 12" 14" 12" RT-10-14 $23.20
58" 12" 18" 16" RT-10-18 $32.80
58" 12" 24" 22" RT-10-24 $36.80
1116" 12" 6" 4" RT-11-6 $16.00
34" 12" 6" 4" RT-12-6 $17.60
34" 12" 14" 12" RT-12-14 $29.60
34" 12" 18" 16" RT-12-18 $35.20
34" 12" 24" 22" RT-12-24 $40.00
78" 12" 6" 4" RT-14-6 $23.20
78" 12" 14" 12" RT-14-14 $32.80
1" 12" 6" 4" RT-16-6 $28.00
1" 12" 18" 16" RT-16-18 $51.20
1" 12" 24" 22" RT-16-24 $58.40
Ram Tip Straight shank 5-piece Bit Kit RT-K5 $39.20
Groo-V Tip Multi-Purpose BitPercussion or rotary-only, the Groo-V Tip makes holes in almost all materials!  Engineered for drilling hard materials, these specialized Ram Tip Bits, have a serrated carbide tip, which pentrates faster - up to 50% faster than standard masonry bits.
Diameter (In.) Overall Length (inches) Drilling Depth (inches) Part No. Price
Point Shank
316" 316" 3" 178" GRT-3-3 $8.80
316" 316" 4" 2 38" GRT-3-4 $9.60
316" 316" 6" 38" GRT-3-6 $10.40
316" 316" 8" 6" GRT-3-8 $11.20
14" 14" 4" 14" GRT-4-4 $9.60
14" 14" 6" 3 34" GRT-4-6 $10.40
14" 14" 8" 7" GRT-4-8 $13.60
516" 14" 4" 2 12" GRT-5-4 $12.00
516" 14" 6" 4" GRT-5-6 $12.80
38" 38" 4" 2 12" GRT-6-4 $12.80
38" 38" 6" 4" GRT-6-6 $13.60
716" 14" 4" 2" GRT-7-4 $16.00
716" 14" 6" 4" GRT-7-6 $17.60
12" 38" 6" 4" GRT-8-6 $16.80
916" 12" 6" 4" GRT-9-6 $23.20
58" 12" 6" 4" GRT-10-6 $24.00
1116" 12" 6" 4" GRT-11-6 $28.00
34" 12" 6" 4" GRT-12-6 $29.60
78" 12" 6" 4" GRT-14-6 $38.40
1 12" 6" 4" GRT-16-6 $50.40

Screw-Type Anchor Bits

Anchors Use These Part No. Price
316" X 1 14" 532" Dia X 3 12" Length TC-5-3 $4.24
316" x 1 34"
316" X 2 14" 532" Dia X 4 12" Lgth TC-5-4 $4.64
316" X 2 34"
316" X 3 14" 532" Dia x 5 12" Lgth TC-5-5 $5.04
316" X 3 34"
316" X 4 "
14" X 1 14" 316" Dia X 3 12" Lgth TC-3-3 $4.24
14" X 1 34"
14" X 2 14" 316"" Dia X 4 12" Lgth TC-3-4 $4.64
14" X 2 34"
14" X 3 14" 316" Dia X 5 12" Lgth TC-3-5 $5.04
14" X 3 34"
14" X 4"
R4X Rotary/PercussionThe special cold-forged process used to produce R4X Bits produces a drill of exceptional strength at a reduced cost.
Diameter (In.) OverallLength(inches) DrillingDepth(inches) Part No. Price
Point Shank
1/8 1/8 3 1 /34 RX-2-3 $3.20
3/16 3/16 4 2 /12 RX-3-4 $2.72
1/4 1/4 4 2 1/2 RX-4-4 $3.12
1/4 1/4 6 4 RX-4-6 $4.00
1/4 1/4 12 10 Rx-4-12 $10.08
5/16 1/4 4 2 1/2 RX-5-4 $4.00
5/16 1/4 6 4 RX-5-6 $4.48
5/16 1/4 12 10 Rx-5-12 $10.08
3/8 1/4 4 2 /12 RX-6-4 $4.08
3/8 1/4 6 4 RX-6-6 $5.52
3/8 3/8 12 10 RX-6-12 $12.64
7/16 1/4 4 2 1/2 RX-7-4 $6.32
7/16 1/4 6 4 RX-7-6 $7.12
1/2 1/4 4 2 1/2 RX-8-4 $6.00
1/2 1/4 6 4 RX-8-6A $7.20
1/2 3/8 6 4 RX-8-6 $7.20
1/2 3/8 12 10 RX-8-12 $13.44
9/16 3/8 6 4 RX-9-6 $9.28
5/8 1/2 6 4 RX-10-6 $9.76
5/8 1/2 12 10 RX-10-12 $16.80
11/16 1/2 6 4 RX-11-6 $13.44
3/4 1/2 6 4 RX-12-6 $13.60
3/4 1/2 12 10 RX-12-12 $22.80
7/8 1/2 6 4 RX-14-6 $15.20
7/8 1/2 12 10 RX-14-12 $25.20
1 1/2 6 4 RX-16-6 $22.00
1 1/2 12 10 RX-16-12 $34.80
TIP-TOP Rotary Only Fast SpiralFor the professional or the home-user, TIP-TOP bits are recommended for drilling in all types of masonry. The fast spiral and the special carbide cutter assure fast penetration with minimal pressure.
Diameter (In.) OverallLength(inches) DrillingDepth(inches) Part No.  
Point Shank
1/8 1/8 3 1 3/4 TT-2-3 $3.20
3/16 3/16 4 2 1/2 TT-3-4 $4.00
1/4 1/4 4 2 1/2 TT-4-4 $4.80
1/4 1/4 6 4 TT-4-6 $6.40
1/4 1/4 12 10 TT-4-12 $12.80
1/4 1/4 18 16 TT-4-18 $20.80
5/16 1/4 4 2 1/2 TT-5-4 $7.20
5/16 1/4 6 4 TT-5-6 $8.00
5/16 5/16 18 16 TT-5-18 $24.00
3/8 1/4 4 2 1/2 TT-6-4 $8.00
3/8 1/4 6 4 TT-6-6 $8.80
3/8 3/8 18 16 TT-6-18 $26.40
3/8 1/4 24 22 TT-6-24 $33.60
7/16 1/4 4 2 1/2 TT-7-4 $8.80
7/16 1/4 6 4 TT-7-6 $9.60
1/2 1/4 4 2 1/2 TT-8-4 $8.80
1/2 3/8 6 4 TT-8-6 $9.60
1/2 1/4 6 4 TT-8-6A $9.60
9/16 3/8 6 4 TT-9-6 $11.20
5/8 1/2 6 4 TT-10-6 $12.80
11/16 1/2 6 4 TT-11-6 $15.20

3/4

1/2

6

4

TT-12-6

$16.80

1 1/2 6 4 TT-16-6 $26.40