PD-55 Channel Post Driver Kit

$3,657.30

Add to Cart:

Contains the basic pieces needed to begin driving in channel post.

Includes

PD-55 Medium Duty Post Driver with 37/8" Master Chuck 1 70013
Channel Post Chuck Adapter - 1.2-1.5 lbs/ft Post 1 70832
Drive Cap for the Channel Post Break-Away Anchor System 1 70836
Throttle Valve Kit, include 5' Hose Whip 1 600000
Filter-Regulator-Lubricator and Carrier 1 225005
15' 2" Hose Whip 1 71199
Non-Detergent Oil - 1 quart 1  
Service & Operating Instructions    

Does not include transport cart

** FREE SHIPPING within the Continental United States

SPECIFICATIONS

TOP COVER Ductile iron casting, high in strength and ductility has a 1" (25.4 mm) diameter handle designed into the cover for easy handling and carrying. O-Ring sealed.
BODY Ductile iron casting, with excellent wear resistant characteristics. The air inlet is cast into the body and tapped with 3/4" NPT female threaded ports, along with 1" (25.4 mm) diameter ergonomically designed side handles for easy handling and carrying. Chuck bolts pass thru the lower body flange into tapped holes in the chuck mounting plate allowing special chucks to be made in a wide variety of shapes and sizes.
PISTON Alloy steel heat treated with a ground surface with hard chrome plate. Designed with 2 round valve ports to give better lubrication and load distribution to the valve ring while running.
MASTER CHUCK & CHUCK ADAPTORS The 3 7/8" (98.4 mm) I.D. master chuck is of an all welded, reinforced steel and tubing construction. The chuck is equipped with extra long chuck adaptor attachment lugs. Standard chuck adaptors are available in the following sizes: 1" (25.4 mm) I.D., 1 1/2" (38.1 mm) I.D., 2" (50.8 mm) I.D., 2 1/2" ( 63.5 mm) I.D., 3" (76.2 mm) I.D., 3 1/2" (88.9 mm) I.D. and three channel post chuck adaptors for 1.2 to 1.5 lbs/ft, 2 to 2.75 lbs/ft and 3 to 4 lbs/ft posts.
FASTENERS S.A.E.Grade 5 bolts with belleville lock washers. All fasteners are plated.
AIR CONSUMPTION 42 CFM (1.19 m3/min) @ 90 PSI (6.4 kg/cm2)
WEIGHT 55 lbs.
HEIGHT 21"

Adapters & Accessories

3½" ID Chuck Adapter 70609 4"x4" Wood Post Chuck 70590 Transport Cart 71201
3" ID Chuck Adapter 70610 PD55 Chuck Adapter for Channel PostBreak-Away Anchor System 70832 Hose Assy - ¾" and up to 25' Hose-includes assembly, labor and all parts EXCEPT hose.   607000
2½" ID Chuck Adapter 70611 Drive Cap for the Channel Post Break-Away Anchor System 70836 ¾" Hose - price per foot 605006
2" ID Chuck Adapter 70612 PD55 Chuck Adapter for Square Tube Break-Away Anchor System 71014 Air Hose Assembly - 100' x ¾" 100048
1½" ID Chuck Adapter 70613 1¼" Low Drive Extension Drive Cap for Square Break-Away Bases 1" Pin 71004 Throttle Valve Kit with 5' Hose Whip 600000
1" ID Chuck Adapter 70614 1½" Low Drive Extension Drive Cap for Square Break-Away Bases 1¼" Pin 71005 Filter-Regulator-Lubricator 601128
Channel Post Chuck Adapter - 1.2-1.5 lbs/ft Post 70617 1¾" Low Drive Extension Drive Cap for Square Break-Away Bases 1½" Pin 71006 Carrier for Filter-Regulator-Lubricator 225001
Channel Post Chuck Adapter - 2.0-2.75 lbs/ft Posts 70618 2" Low Drive Extension Drive Cap for Square Break-Away Bases 1¾" Pin 71007    
Channel Post Chuck Adapter - 3.0-4.0 lbs/ft Posts 70619 2¼" Low Drive Extension Drive Cap for Square Break-Away Bases 2" Pin 71008    
2" PD55 Heavy Chuck Adapter 70615 2½" Low Driver Exension Drive Cap for Square Break-Away Bases 2¼" Pin 71009    
    2" Drive Cap for Schedule 40 Pipe with T-Bar & Clip 71260    
    2½" Drive Cap for Schedule 40 Pipe with T-Bar & Clip 71261    
    3" Drive Cap for Schedule 40 Pipe with T-Bar & Clip 71262  

DOCUMENTATION

PD-55 Fast Facts
PD-55 Safety and Operating Instruction
PD-55 Parts List Breakdown
Filter-Regulator-Lubricator Parts List
Throttle Valve Assembly Parts List

 


  • Model: RHINO71343