Breaking is a dirty job but with a dust collector, the operator is protected against the most harmful dust. Atlas Copco's pneumatic dust collectors use vacuum technology to efficiently remove dust directly at the source and keep the silica dust level on your construction site below the permissible exposure limit. They work indoors as well as outdoors. They don't require power, only a reliable source of compressed air.
FEATURES
- Safe Removal of Dust - Collection of dust in a recyclable bag allows eco-friendly disposal
- Quick Set Up - Simple design and plug and play makes it fast and easy to set-up
- Complete Solution - Comes with shrouds, suction hoses, etc., and a trolley option for easy maneuvering at site and storage
- Simple and Efficient Suction - Patented dry vacuum technology with the best suction efficiency leaving no traces
- 88 dB Silent Operation - Comes standard with an effective silencer reducing noise to 88 dB
- Low Air Requirement - Uses available source of air and only consumes up to 25 cfm for 1 tool
- 99.57% Purity of Exhaust Air - Highly efficient filter elements for purification of the exhaust air
- Easy Filter Cleaning Mechanism - Filter vacuum indicator to alarm operator to flush clean the filters
APPLICATIONS
- Single Breaker Application
- Two Breaker Application - requires a 2 Tool Conversion Kit
- Single Rock Drill Application -requires DCP 10 Rock Drill Kit
SPECIFICATIONS
| Weight, including tripod |
lbs |
55 |
| Air Consumption with 1 tool |
cfm |
25 |
| Air Consumption with 2 tools |
cfm |
50 |
| Vacuum Suction |
mm H2O |
1380 |
| Air Inlet |
in |
1/2 |
| Suction Hose |
in |
1 1/2 |
| Collection Bag |
in |
22 x 28 |
| Height (total) |
in |
52 |
DOCUMENTATION
ACCESSORIES & COMMON REPLACEABLE PARTS
** Silica is found in soil, sand, quartz, stone, concrete, brick and mortar. It is one hundred times smaller than beach sand. Most common high exposure construction activities include sand blasting, sawing brick or concrete, sanding or drilling walls, grinding mortar and cutting, breaking or crushing stone or concrete. Silica exposure poses a hazard and risk for lung cancer, kidney disease and kidney failure, silicosis (pulmonary fibrosis, incurable lung disease, symptoms include shortness of breath, fatigue, chest pain and respiratory failure), and chronic obstructive pulmonary disease (COPD) which includes emphysema and chronic bronchitis which is non-reversible and could progressively worsen.
OSHA REQUIREMENTS FOR VACUUM DUST COLLECTION SYSTEM (VDCS)
Workers use commercially available VDCS's for jackhammers and hand-held powered chipping tools to reduce silica exposute. A VDCS includes a:
- Hood or shroud for the tool that is recommended by the manufacturer
- Vaccum pressure meeting the specifications recommended by the tool manufacturer with enough suction to capture dust at the cutting point
- Dust collector equipped with a filter efficiency of 99% or greater and a filter-cleaning mechanism
- Vacuum exhaust hose capable of providing the airflow recommened by the the tool manufacturer. 1.5" to 2.0" diameter is typically adequate
