The WEDA D30N drainage pump features a max head of up to 83ft, max flow of 190USgpm, and can withstand solids of up to 0.27in.
The WEDA drainage pumps handle either clean or sand-laden water, even with small solid particles, with the best performance and efficiency. These pumps are particularly suitable for general dewatering applications, ground water, raw water, construction sites and harsh conditions on site.
BENEFITS & FEATURES
- Water density up to 68 lb/ft³
- Up to 40% lighter in weight
- pH values from 5 to 8
- Solids handling up to 0.5 inch
- High wear resistance
- Design top discharge
APPLICATIONS & USES
TECHNICAL DATA
PRODUCT CODE |
|
N - Normal Head |
Installation |
|
Portable Drainage Pump |
Hydraulic Range |
|
N-Normal Head
L-High Flow
|
Insulation Class |
|
F (+155°C/+311°F) IEC 85 |
Protection Class |
|
IP68 |
Voltage Variation |
|
Max +/- 5% of nominal voltage |
Voltage Imbalance |
|
Max 2% - between phases |
Max Start-Stop |
|
Max 30 starts/hour |
Cable |
|
H07RN-F (20m) or SOOW AWG (65ft) |
Casted Parts |
|
Corrosion Resistant Aluminum |
Impeller |
|
High Chrome Iron, 55+/-5 HRC |
Wear Parts |
|
Rubber (NBR) |
Strainer |
|
Hard sole - reinformed polyethylene |
Shaft |
|
Stainless steel |
O-Rings |
|
Rubber (NBR) |
Main Bearing |
|
Single row ball bearing in oil |
Mechanical Seal |
|
Primary & secondary; grease lubrucated lip seal on WC wear sleeve |
Built-in Controls & Protection |
|
1 ph: capacitor + contactor 3 ph: contactor + control relay |
Thermal Contacts |
|
140°C / 284°F |
Options/Accessories |
|
Float Switch; Zinc anodes; Epoxy coating; Low suction collar; Quick couplings (hose/NPT/ISO-G/Camlock/Storz); Pump raft; Terminal board; NSSHOU screened cable |
Solids Handling Strainer Hole |
in |
0.27 |
Max Liquid Temperature |
|
104°F |
Max Depth of Immersion |
ft |
65 |
Max Liquid Specific Gravity |
|
1.1 |
pH of Pumped Liquid |
|
5 - 8 |
WEIGHTS & DIMENSIONS |
|
|
Discharge Connection |
in |
3 |
Height |
in |
19.5 |
Width |
in |
11.4 |
Diameter |
in |
8.7 |
Weight |
lbs |
45 |
POWER RATING
Rating |
|
1 ph |
3 ph |
Standard Cable |
Power P1 |
kw |
3.1 |
2.8 |
|
Power P2 |
HP |
3 |
3 |
|
Shaft Speed |
rpm |
3500 |
3500 |
|
230 V |
A |
13 |
9 |
AWG14/16 |
460 V |
A |
-- |
4.5 |
AWG14 |
575 V |
A |
|
3.6 |
AWG14 |
DOCUMENTATION
Breakdown/Parts LIst |
Brochure |