The WEDA L50N slurry pump features a max head of up to 57ft, max flow of 308USgpm, and can withstand solids of up to 1.0in.
The WEDA slurry pumps are the toughest and have the largest apertures to facilitate handling of slurry with the most challenging solids. These pumps are specially designed to operate in quarries, dredging and settling ponds, dealing with abrasive media with high solids content.
FEATURES & BENEFITS
- Water density up to 106 lb/ft³
- Up to 40% lighter in weight
- pH values from 2 to 10
- Soldis handling up to 2.5 inches
- High wear resistance
- Design bottom side and top discharge
APPLICATIONS & USES
- INDUSTRIAL SLURRIES - the WEDA slurry pumps' high abrasion resistance makes them an excellent choice for industrial slurries.
- DREDGING - Slurry pumps for dredging are used to remove contaminants from water, move sediment, create waterways, and mine for metals. The WEDA slurry pump is designed for the toughest applicatons thanks to its high durabilty and abrasion resistance.
TECHNICAL SPECIFICATIONS
| |
|
3ph |
| Max Head |
ft |
57 |
| Max Flow |
US gpm (m3/hr) |
308 (71) |
| Rated Output |
hp |
7 |
| Max Power Input |
kW |
9 |
| Discharge Connection (NPT |
in |
4 |
| Max Solid Handling |
in |
1.0 |
| PRODUCT CODE |
|
|
| Installation |
|
Portable slurry pump |
| Discharge connection |
|
4" Hose/NPT |
| Hydraulic Range |
|
N - Normal Head |
| Solid Handling |
in (mm) |
1.0 (25) |
| Max Liquid Temperature |
°F |
95 (35°C), standard |
| pH of Liquid Pumped |
|
4-10 |
| Frequency |
Hz |
60 |
| Number of Poles |
|
4 |
| Insulation Class |
|
H |
| Protection Class |
|
IP68 |
| Termal Contacts |
°F (°C) |
230 (110) |
| Cable |
|
H07RN-F 4G10/SOOW 4 x AWG6 |
| Cable Length |
ft (m) |
65 (20) |
| Outer Casing |
|
CI alloy |
| Impeller |
|
Cr Alloy CI |
| Wear Parts |
|
Cr Alloy CI |
| Stator Housinhg |
|
CI Alloy |
| Strainer |
|
CI Alloy |
| Shaft |
|
Stainless Steel |
| O-Rings |
|
Viton |
| Discharge Connection |
|
CI Alloy |
| Bearings |
|
Heavy-Duty |
| Motor Side Seals |
|
1 mechanical seal (silicon carbide in oil bath) |
| Impeller Side Seals |
|
1 mechanical seal (silicon carbide in oil bath) + 4 lip seal (2 BUNA + 2 TPU) |
| Starting Method |
|
External DOL starter |
| WEIGHT & DIMENSIONS |
|
|
| Height |
in |
36 |
| Width |
in |
17,1 |
| Diameter |
in |
16.2 |
| Weight |
lbs |
578 |
POWER RATING
| Rating |
|
3 ph |
| Power P1 |
kW (HP) |
6.8 (9.1) |
| Power P2 |
kW (HP) |
5.5 (7.4) |
| Shaft Speed |
A |
9.8 |
| 460V |
rpt |
1750 |
DOCUMENTATION
| Breakdown/Parts LIst |
| Brochure |
