TEX P60S Pneumatic Breaker - 1 1/8 x 6"

$1,360.00

Weight: 78.3 lbs

Add to Cart:

With the TEX P60 and TEX P90 we concentrate on two key factors for demanding customers: Performance and reliability. The TEX P60 and TEX P90 are designed, just like the TEX 140 - 280 series, from a one piece, solid-cast housing, which eliminates the need for separate front heads, back heads and side bolts. This design means 30% fewer parts than in traditional breakdowns.

The TEX P90 is the most hard hitting breaker in the TEX range and ideal for demanding demolition jobs in hard materials. For TEX P60 the focus is on high productivity when cutting softer materials like asphalt and therefore it has a high blow frequency.

Minimal parts inventory and easy service

All but three parts in the TEX P60 and TEX P90 are interchangeable, so your spare parts inventory can be kept to a minimum. These heavy-duty breakers allow extremely fast and easy on-site service. A hammer and a mandrel are all you need for almost any service task, wherever you are.

Features:

  • Easy to maneuvre - with a low center of gravity, these breakers are well balanced and easy to handle.  The unique air inlet swivel, which can be rotated even when pressurized, make the TEX breakers still easier to maneuvre.
  • Redued wear - The anvil block, a tried and tested design from earlier heavy models, not only helps handle the great impact energy, but also helps avoid damage to the hammer mechanism from worn out chisel shanks.
  • Controlled power - There is power in abundance, but it is easy to control.  Thanks to the SOFSTART two-step trigger, the operator chan begin tohammer slowly, setting the chisel where it's needed, without a lot of wasted effort.
  • Full-shift lubricator - The built-in lubricator ensures sufficient lubrication to minimize tool wear.  It is easily accessible, accepts both mineral and synthetic oils and holds enough oil for an entire shift.
  • Air-custioned action - TEX P60 and P90 feature air-custioned piston return.  This means less vibration during back hammering and blank hammering, which reduces stress on man and machine.
  • Optional silencer - The silencer, available as an option, significantly reduces the nose level.  Thanks to its slim design, it provides a full view of the chisel and work-piece for maximum control.

Typical application areas:

  • General demolition
  • For use in medium and hard materials
  • TEX P60 - asphalt
  • TEX P90 - hard and reinforced concrete

** FREE SHIPPING within the Continental United States

SPECIFICATIONS

Breaker type: Standard
Breaker Version:   Silenced
Shank Size (in):   1-1/8 x 6
Weight (lb): 79
Length (in):  76
Air Consumption (cfm):  27
Impact Rate (blows/min):  1500
Vibration Level 3 Axes (ISO 28927-10):   
Sound Power Level Guaranteed, Lw (2000/14/ED):  
Sound Pressure Level (ISO 11203) Lp,r=1m  

CONSUMABLES

Paving Breaker Tools
Paving Breaker Tools

DOCUMENTATION

Spare Parts List
Safety & Operating Instructions

ACCESSORIES & COMMON REPLACEABLE PARTS

Complete Standard US Claw Coupling 9001000506 Rock Drill Oil - 1 Gal RDO1G
Gauge - 1" Hex 3310150925 Rock Drill Oil - 5 Gal RDO5G
Gauge - 11/8" Hex 3310150928 Line Oiler LO-10PF
Vacuum Dust Extraction Kit for Paving Breakers & Rock Drills PB-RD-VDEX-KIT Whip Check WCSML
Dust Control Spray Kit 9753300015 Contractors Air Hose - 50' AIRH-19-50R
    Hose Whip Assy w/ 3.7oz Lubricator TX7HW
    Hose Whip Assy w/ 11oz Lubricator TX11HW
    Air King Universal Coupling AM8

 


  • Model: AC-8461022722