Reliant RC40 Abovedeck Hydraulic Compressor - 30-40CFM with Cold Weather Package
Ideal choice for mechanic and service trucks
For applications where truck-bed space is at a premium, yet your application demands powerful performace time after time, rely on Vanair's RC40 hydraulic-powered reciprocating compressor to get the job done.
SPECIAL FEATURES
Air Compressor
-
Reciprocating type
-
Integral hydraulic oil cooler
-
Available with open or closed hydraulic manifold block
-
V-betls driven by hydraulic motor
-
Powder-coated, calvanneal sheetmetal enclosure
-
Designed with 3 V-Belts for maximum productivity
-
Rugged, cast-iron crankcase
-
Corrosion-resistant steel valves
-
Tapered roller-type main bearings
-
Balanced crankshaft
-
Weight-matched balanced pistons
-
High-flow valves
-
Lightweight connecting rods
-
Supply connections: Hydraulic oil in - 3/4"; Hydraulic oil out - 1"; Case drain - 1/4"
-
Electrial 12-volt DC or 24 volt
-
Vibration isolation for air compressor and ry system for quiet operation
Air Compressor Control System
-
Integral on-off manifold with solenoid diverter valve and hydraulic pressure relief valves
Safety Equipment
-
Air pressure-relief safety valve
-
Hydraulic oil pressure-relief valve
Options/Accessories
-
Filter Lubricator Regulator
-
Air hoses, hose reels, and fittings
-
20, 30, or 60 gallon air reservoirs
Hydraulic System Recommendations
Vanair highly recommens consulting a hydraulic supply expert for specifying the correct hydraulic pump size and type, oil reservoir size, hydraulic oil cooler, hydraulic pressure relief, and other hydrualic supply comonents for your application. Please take into consideration the following:
-
The hydraulic flow and pressure requirements of the air compressor
-
Keep in mind that when the compressor is runnign there is a continuous hydraulic load
-
The duty cycle and ambient operating temperatures
-
Other hydraulic euqipment which may share the same hydraulic supply system
TECHNICAL SPECIFICATIONS
Capacity |
CFM @ 100 PSIG |
30-40 |
|
Compressor |
40CFM |
Two-stage reciprocating with discharge check valve |
|
Input Speed |
RPM |
865 |
|
Hydraulic Motor |
|
Gear-type |
|
Hydraulic Requirement |
CFM Rating @ 100 PSI |
30 |
40 |
Air Pressure |
PSI |
100/125/150/175 |
100/25/150/175 |
Hydraulic Flow |
GPM |
9.5 |
12 |
Hydraulic Pressure |
PSIG |
175/1875/2100/2200 |
1950/2070/2175/2275 |
Compressor Drive |
|
|
3 V-Section Belt Design |
Weight (Dry) |
lbs |
410 |
|
Dimensions |
in |
36.25L x 21W x 22H |
|
ACCESSORIES AND MAINTENANCE
Reliant RC40 Service Kit |
KIT1185 |
Air Reservoir Tank - 28 Gal (Underdeck mounted tank with mounting brackets) |
032707 |
Air Reservoir Tank - 30 Gal |
OA49645 |
Filter Lubricator Regulator - 1/2" |
264493 |
Moisture Separator - Service LIne |
265243 |
OSHA Valve - up to 70 CFM - Excess flow safety valve |
MA272578 |
Vanguard Reciprocating Compressor Oil - 1 Gal |
271856-1GAL |
Vanguard Reciprocating Compressor Oil - 1 Qt. |
271856-1QT |
Vanguard Premium Green Oil - 4 Pack |
264626-4GREEN |
Vanguard Premium Oil - 4 Gal. |
264626-4PACK |
DOCUMENTATION