Reliant RC40 Reciprocating 40CFM Open Center 24V Standard
Ideal choice for mechanic and service trucks
For applications where truck-bed space is at a premium, yet your application demands powerful performace time after time, rely on Vanair's RC40 hydraulic-powered reciprocating compressor to get the job done.
SPECIAL FEATURES
- 30-40 CFM and up to 175 PSI
- 12V and 24V DC Models available
- Open Center or Closed Center Hydraulic Manifold Block
- Vibration Isolation on Air Compressor and Drive System for Quiet Operation
- Four-pin Weatherproof Electrical Connection
- Heavy-duty Powder-coated, Galvanneal Shet Metal Enclosure
RECIPROCATING AIR COMPRESSOR
- Rugged, Cast Iron Crankcase
- Corrosion-resistant Steel Valves
- Tapered Roller Type Main Bearings
- Balanced Crankshaft
- Weight-matched Balanced Pistons
- High Flow Valves
- Lightweight Connecting Rods
AIR COMPRESSOR CONTROL SYSTEM
- Integral On-Off Manifold with Solenoid Diverter Valve and Hydraulic Pressure Relief Valves
HYDRAULICS
- Air Pressure Relief Safety Valve and Automati Blow Down on Shut Down
- Hydraulic Oil Pressure Relief Valve
SAFETY EQUIPMENT
- Gear-type Motor
- V-Belt Driven
- Integral Hydraulic Cooler for Air System
- Hydraulic Oil In - ¾" 37° JIC
- Hydraulic Oil Out - 1" 37° JIC
- Air Pressure Relief Safety Valve
- Hydraulic Oil Pressure Relief Valve
- Automatic Blow-Down on Shutdown
INSTRUMENTATION
- Hour and Pressure Gauges
- Conveniently Located and Easy to Read
HYDRAULIC SYSTEM RECOMMENDATIONS
All hydraulic ratings and pressures are at the machine and do not take into account the pressure drops of individual hydraulic systems. These pressure drops need to be taken into account and added to the rating of the hydraulic pump and components. Vanair highly recommends consulitng a hydraulic supply expert for specifying the correct hydraulic pump size and type, oil reservoir size, hydraulic cooler, hydraulic pressure relief, and other hydraulic supply components for your appilication. Please take into consideration the following: The hydraulic flow and pressure requirements of the air compressor, the continuous hydraulic load when the compressor is running, the duty cycle and ambient operating temperatures, and any other hydraulic equipment that may share the same hydraulic supply system.
TECHNICAL SPECIFICATIONS
Capacity |
CFM @ 100 PSIG |
30-40 |
|
Compressor |
40CFM |
Two-stage reciprocating with discharge check valve |
|
Input Speed |
RPM |
865 |
|
Hydraulic Motor |
|
Gear-type |
|
Hydraulic Requirement |
CFM Rating @ 100 PSI |
30 |
40 |
Air Pressure |
PSI |
100/125/150/175 |
100/25/150/175 |
Hydraulic Flow |
GPM |
9.5 |
12 |
Hydraulic Pressure |
PSIG |
175/1875/2100/2200 |
1950/2070/2175/2275 |
Compressor Drive |
|
|
3 V-Section Belt Design |
Weight (Dry) |
lbs |
410 |
|
Dimensions |
in |
37.0L x 21.0W x 22.0H |
|
ACCESSORIES AND MAINTENANCE
Cold Weather Kit |
KIT1269 |
Reliant RC40 Service Kit |
KIT1185 |
Air Reservoir Tank - 28 Gal (Underdeck mounted tank with mounting brackets) |
032707 |
Air Reservoir Tank - 30 Gal |
OA49645 |
Filter Lubricator Regulator - 1/2" |
264493 |
Moisture Separator - Service LIne |
265243 |
OSHA Valve - up to 70 CFM - Excess flow safety valve |
MA272578 |
Vanguard Reciprocating Compressor Oil - 1 Gal |
271856-1GAL |
Vanguard Reciprocating Compressor Oil - 1 Qt. |
271856-1QT |
Vanguard Premium Green Oil - 4 Pack |
264626-4GREEN |
Vanguard Premium Oil - 4 Gal. |
264626-4PACK |
DOCUMENTATION