The PD 200 Pile Driving Kitprovides everything you need to start running this post driver. The kit includes:
- A PD200 Pneumatic Post Driver with a standard master chuck (7in ID) included.
- Throttle valve kit with 5ft hose whip.
- Filter-Regulator-Lubricator with carrier and hose to ensure compressed air quality and proper lubrication.
- 15 ft Hose Whip Assembly.
- 6″ x 6″ Master Chuck Assembly.
- Slotted Master Chuck Assembly.
- Rock Drill Oil – 1 Gallon.
- All chuck adapters sold separately.
Features:
- At 170 pounds, with a Alloy Steel piston, the PD-200 provides better handling in tough sites.
- It is a Heavy Duty duty air operated post driver with an air consumption of 72CFM at 90psi.
- Delivering up to 930 blows per minute, and capable of driving Guardrails and other Heavy Duty posts.
- No additional equipment required. Can be lifted by two people.
- Additional driving options possible with easy bolt-on adapters.
Applications (with additional chuck adapters. contact us for assistance):
- Ground Rods
- Tent Stakes
- Form Pins
- Pipe – up to 7 inches
- T Posts
- Telespar Posts
- Channel Posts
- Dock Piles
- Guardrail Posts
