Post Driving Accessories

Post driving accessories decide the size and shape of post a driver can actually set — the chuck or cap that seats on the post head, the steel that carries the blow, and the gear that keeps the tool fed and moving down the line. Parts here are grouped by driver family, so start with the tool you own: Rhino PD pneumatic series accessories for the PD-55 through PD-200 air drivers, and Rhino GPD gas series accessories for the Fence Pro, Ranch Pro and Multi-Pro. Jack hammer crews drive post and pipe with breaker post, pipe and tamper driving tools such as the 1-1/8 in. x 6 in. x 16 in. tie tamping tool, and hand crews use manual drive caps. For the tools themselves see post drivers and post pounders or the Rhino post drivers buyer’s guide.

Rhino Accessories by Driver Series

Each Rhino family takes its own tooling, and nothing crosses between them. The pneumatic PD line splits again into PD master chucks and adapters and PD drive caps, hose and air prep. HPD hydraulic series accessories cover the handheld hydraulic driver, and Guard and Solar Pro series accessories carry guide plates, post adapters and the pile lift and puller kits for the mounted driver.

Atlas Copco and Chicago Pneumatic Hydraulic Drivers

The Atlas Copco KAPD and LPD tools and the Chicago Pneumatic PDR tools share a matched accessory set — T-post chucks, round, square and ground rod drive caps, and guide tube adapters sized to the post OD. Those are listed under Atlas Copco and CP hydraulic post driver accessories. All of them run off a hydraulic power pack rather than a compressor.

Pulling Posts Back Out

Fence, sign and guardrail work rarely runs one direction. Rhino post pullers and the wider post puller range lift post, pipe and pile without digging them out or cutting them off at grade. Jaws and chains are sized to the post, the same way a chuck is.

Common Questions

What is a post driving cap? A hardened steel cap that takes the blow instead of the post head, so pipe and channel do not mushroom or split. Schedule 40 pipe, U-channel, square Telespar and H-column each need their own profile; sledge-driven versions sit under hand drive caps.

Where do I find Rhino post driver parts? Under the series that matches your tool, then by function: chucks and inserts in the adapter group, caps and air prep in the accessory group. For exploded views and part numbers, use the parts and diagrams hub.

Do you carry pile driving accessories? Yes. The PD-200 runs 5-1/2 in. and 7 in. master chucks for pipe and pile, and the mounted Solar Pro and Guardrail Pro take guide plates and a pile puller kit.

How fast does this ship? Everything here ships from Denver, and in-stock parts ordered by 4 PM ET ship the same day. Ask us to confirm stock on a particular chuck or cap if you are on a schedule.