The Kaeser Mobilair M17 is a 60 CFM at 100 PSI direct-drive rotary-screw air compressor powered by a 17.4 hp Honda GX630 V-twin gas engine. Built around Kaeser's SIGMA PROFILE airend for fuel-efficient continuous-duty air, the M17 replaces piston and wheelbarrow compressors with a compact 450 lb pickup-bed-sized rotomolded polyethylene cabinet.
- 60 CFM at 100 PSI continuous output, with maximum pressure capability up to 217 PSI for blow-down and pressure-testing applications
- 17.4 hp Honda GX630 V-twin gas engine U.S. industry standard for outdoor power equipment in this horsepower class; 2300-3300 RPM full load
- Single-stage oil-injected rotary-screw construction with Kaeser SIGMA PROFILE rotor geometry more air per gallon than competing small-class screw compressors
- Compact 450 lb unit in 42-1/2 x 31-1/2 x 31 in. rotomolded polyethylene cabinet impact-tolerant, corrosion-free, lighter than steel canopies
- 5.3 gal fuel capacity, 1/2 in. NPT outlet, 82 dB(A) at 23 ft; sized to fit a standard pickup bed or compact service-truck mount
- Applications: framing nailers and post drivers, irrigation system blow-out, fiber-optic cable blowing, monument engraving, HVAC duct cleaning, tire-shop service-truck air
- Supports a single 90 lb pneumatic breaker, a single 4-inch piercing tool, or two simultaneous medium-CFM tools on the same circuit
- Crowder Supply stocks contractor air hose, hose whips, line oilers, pressure regulators, aftercoolers, and Genuine Kaeser service parts; backed by optional 5-year Kaeser air-end warranty