The Atlas Copco TEX 14 is part of the Swedish-engineered TEX-series handheld pneumatic demolition platform that anchors industrial rivet-busting and concrete-demolition work in bridge, tank, and structural-steel applications. The 8 in. piston stroke places the TEX 14 in the heavy rivet-buster class, with a stepped cylinder design that lengthens piston travel for higher per-blow energy without increasing tool weight.
- Closed D-handle configuration with teasing throttle for progressive control from light tap-down to full-impact running.
- Delivers 900 BPM at 44 CFM consumption at 90 PSI, fed through a 1/2 in. female NPT air inlet; 24 in. overall length.
- Sound pressure 93 dB(A), guaranteed sound power 105 dB(A), vibration 12 m/s2 (ISO 28927-10) for HAVS and hearing-conservation calculations.
- Air draw fits a 100-CFM compressor for two-tool operation or a 185-CFM compressor for four-tool operation on the same circuit.
- Built for driving hot rivets, removing old rivets, bridge-deck rehab on rebar, tank cutting, and heavy horizontal demolition.
- Accepts the industry-standard Jumbo 11X (.866 in.) shank for cup chisels, flat and ripper chisels, moil points, and backout punches.
- Crowder Supply stocks the full Jumbo 11X rivet-buster steel range plus TEX 14 cylinders, valves, throttle assemblies, retainers, and buffer rings.
- Backed by Atlas Copco's global parts pipeline and one of the longest-running TEX-series pneumatic demolition catalogs in the industry.
