The rivet buster 11X punch drives out rivets, pins and fasteners that hand methods will not move: seat the punch squarely on the fastener and let the slow, heavy blows of the rivet buster hammer it through. Built from heat-treated steel on the standard 11X shank in a 10 in. length, with punch sizes covering 3/8 in. through 7/8 in. rivets.

Rivet punching is the trade these tools were named for dismantling riveted structural steel on bridges, ship hulls and rail equipment, and freeing seized pins in trucks, trailers and heavy machinery. The punch runs in the same pneumatic rivet busters as the rest of our 11X demolition steel; the rivet buster buyer’s guide covers matching stroke length to the work.

• Punch sizes for 3/8, 1/2, 3/4 and 7/8 in. rivets, pins and fasteners
• 10 in. working length on the standard 11X rivet buster shank
• Heat-treated steel stands up to repeated high-impact fastener driving
• Applications: rivet and pin removal on bridges, ship hulls, railroads and heavy machinery
• Also used for chassis and frame work in truck, trailer and industrial equipment repair
• Stocked by Crowder Supply in Denver in all four punch sizes