The Texas Pneumatic TXCH2 is a 18 lb 4-bolt in-line pneumatic chipping hammer with a 2 in. piston stroke, purpose-built for industrial scaling, chiseling, weld cleanup, and form stripping. Key specs include 2,100 BPM impact rate, 33 CFM consumption at 90 PSI, .580 in. hex or .680 in. round chuck options. Ironworkers, masons, refractory crews, and demolition contractors run the Texas Pneumatic TXCH2 for medium-duty chipping where heavier breakers cause operator fatigue.
- 4-Bolt drop-forged in-line construction balances tool weight and rigidity for sustained overhead and one-handed scaling work.
- Rated 2,100 BPM, 2 in. stroke, 18 lb for balanced impact across scaling, chiseling, and form-stripping work.
- Consumes 33 CFM at 90 PSI, compatible with standard contractor whip hose and inline oilers for shop or field use.
- A 185-CFM compressor supports single-tool continuous use; larger 185-CFM units run multiple operators on the same circuit.
- Available with .580 in. hex or .680 in. round chuck plus ball, oval-collar, or bolt-on retainer styles to match existing steel inventory.
- Built for scaling slag and rust, weld-spatter cleanup, form stripping, refractory-lining repair, mortar removal, and detail chiseling.
- Ironworkers, masons, refractory crews, and demolition contractors specify it for medium-duty chipping where heavier breakers cause operator fatigue.
- Crowder Supply stocks .580 in. hex and .680 in. round chipping steels plus replacement chucks, retainers, springs, and pistons for the Texas Pneumatic TXCH2.
- Texas Pneumatic builds and stocks a complete domestic line of pneumatic chipping, riveting, and demolition tools with strong field-replacement support.
