Rhino's pneumatic drivers have been the choice of professional installers for over 45 years, built around a single reciprocating piston controlled by a double valve. With one moving part doing all the work, Rhino pneumatic drivers are exceptionally durable and exceptionally low-maintenance many fence contractors are still running drivers purchased decades ago.
- Heavy-duty single-piston design with one moving part exceptionally durable and low maintenance
- 170 to 177 lb hand-held weight delivers approximately 900 BPM at 100 PSI with a 4 in. alloy steel piston
- Outperforms a 90 lb jackhammer for blow energy on dock pile, sheet pile, and large wood post work
- PD-200G 4×6 Guard Rail configuration drives 4×6 H-column guardrail post with the 4 in. master chuck and drive cap
- PD-200 6×6 Wood Piling configuration drives 6×6 wood post with the 6×6 square master chuck installed
- PD-200 5-1/2 in. and 7 in. round configurations drive 4-3/4 in. and 5 to 6 in. pipe with the matching master chuck
- PD-200S Sheet Pile configuration drives sheet pile and seawall systems with the slotted master chuck
- 72 CFM at 100 PSI air consumption requires a 100+ CFM tow-behind or trailer-mounted compressor with peak headroom
- Built in Kewanee, Illinois by Rhino Tool Company, the dominant U.S. manufacturer of professional post drivers since 1975
- Crowder Supply ships every PD-200 configuration factory-direct; FRL, hose, and chuck accessories available separately
