The Rhino throttle valve kit (part 600000) puts air control at the operators position on a Rhino pneumatic post driver: mounted in the supply line, the valve lets the crew start and stop air to the tool without walking back to the compressor. Rhino shows the kit in its parts diagrams for the PD 45, PD 55, PD 100, PD 140 and PD 200 post drivers.
The throttle valve is one leg of a properly plumbed air line on drivers like the PD-200 a filter-regulator-lubricator conditions the air and keeps rock drill oil flowing while the tool hits. Hose whips, fittings and the rest of the plumbing are in our Rhino PD hoses and accessories, with everything else for the air drivers under Rhino PD pneumatic series accessories.
- In-line throttle valve gives the operator start-stop air control at the tool
- Referenced in Rhino parts diagrams for the PD 45, PD 55, PD 100, PD 140 and PD 200
- Pairs with a filter-regulator-lubricator for a complete conditioned air-line setup
- Genuine Rhino part 600000; weighs 7 lb
- Fits the air-supply side of Rhino PD series pneumatic post drivers
- Stocked by Crowder Supply in Denver
Throttle Valve Kit FAQ
Which Rhino post drivers does this throttle valve kit fit?
Rhino’s parts diagrams show kit 600000 on the PD 45, PD 55, PD 100, PD 140 and PD 200 pneumatic post drivers.
What does the throttle valve do?
Mounted in the supply line, it gives the operator start-stop control of air to the driver right at the tool, with no walk back to the compressor between posts.
Do I still need a filter-regulator-lubricator with it?
Yes — the throttle valve only starts and stops the air. The FRL conditions the supply and keeps rock drill oil flowing to the driver while it hits.
