Rhino PD-200 Chuck Adapters bolt directly into the 7 in. master chuck to match the Rhino PD-200 post driver to virtually any post profile in the field. Round adapters step the 7 in. bore down through inner diameters from 2-1/2 in. to 5-3/4 in., seating each post on the chuck centerline so full impact force travels straight down the post for clean, straight drives in tough soil conditions.

Round adapters cover 2 in. through 5 in. pipe, Telespar posts, C posts and sand points; 2-1/2 in. and 3 in. breakaway anchor adapters handle Telespar breakaway anchor posts; and dedicated 3 in. and 3-1/2 in. drive caps are required for Schedule 40 pipe in those sizes see the pipe driving chart on this page for the recommended adapter. Browse the complete range of PD chucks and adapters, or start with the Rhino post driver buyers guide when matching a driver to the job.

• Round adapter inner diameters from 2-1/2 in. to 5-3/4 in. for the PD-200s 7 in. master chuck
• Drives 2 in. through 5 in. pipe, Telespar posts, C posts and sand points
• 2-1/2 in. and 3 in. breakaway anchor adapters sized for Telespar breakaway anchor posts
• 3 in. and 3-1/2 in. drive caps required for Schedule 40 pipe in those sizes
• Bolts into the master chuck and seats the post on the chuck centerline for straight, full-force drives
• Made in the USA and stocked by Crowder Supply in Denver