Carrier base plate and adapter plate not included. Epiroc attachments mount to the carrier through a carrier-specific base plate, adapter plate and bolt kit, which are not part of this price. Call us at 888-883-5144 or contact us with your carrier make and model for exact pricing.

The Epiroc HM 2000 is a hydraulic scrap magnet for 33,100–99,200 lb (15–45 t) excavators. It picks up scrap metal on demolition sites, scrap yards and recycling facilities and keeps the ground clear for crews and equipment.

Service weight 4,410 lb (2,000 kg) with an average-sized adapter plate; product weight 3,640 lb (1,650 kg). Tearing force 16.5 US tons (15 t); maximum load 8.3 US tons (7.5 t). Magnet plate diameter 49.2 in. (1,250 mm); height 41.3 (1,050 mm) (F version) or 49.4 retracted / 63.2 extended (1,255 / 1,605 mm) (M version). Built-in 13 kW generator with 9 kW magnet power, driven by 23.8–66 gpm (90–250 l/min) at up to 5,075 psi (350 bar); magnet plate activation 5.3 gpm (20 l/min) at up to 725 psi (50 bar). A drain line is required.

The built-in generator’s control technology magnetizes quickly with impulse excitation and releases the load by automatic demagnetization with counter voltage and sequence pulsation. Magnetization is operated hydraulically or electrically by radio remote control, and an integrated LED status display shows the operating conditions. Choose the F version with a fixed magnet plate for demolition and construction sites, or the M version with a movable plate on a chain connector for mass loading at scrap yards; both are the same price.

Service parts on the HM 2000 Scrap Magnet breakdown (serial DEQ229049 and later): hydraulic motor seal kit 3382060260, label kit 3363115723 and rubber isolator kit 3382060262, and connection hoses 3360992340 / 3361853859 / 3363115797 / 3363031767 / 3363034399. See the HM 2000 Scrap Magnet parts diagram for every part, and the full Epiroc excavator attachments range.

• Fits 33,100–99,200 lb (15–45 t) excavators; service weight 4,410 lb (2,000 kg)
• 16.5 US tons (15 t) tearing force; 8.3 US tons (7.5 t) maximum load
• 49.2 in. (1,250 mm) magnet plate; 13 kW generator, 9 kW magnet power
• F (fixed plate) or M (movable plate on chain connector) configuration
• 23.8–66 gpm (90–250 l/min) generator drive at up to 5,075 psi (350 bar); drain line required
• Carrier base plate and adapter plate not included; contact us for exact pricing