Minuteman XL8 Post Driver

Minuteman XL8 Post Driver

QUOTE

Add to Cart
Minuteman XL8 Post Driver
Minuteman XL8 Post Driver
QUOTE
Free Shipping (Ground shipping to lower 48)

The Minuteman XL8 is a gas powered post driver whose on-board rotating extension handle drives fence posts up to 8 ft (2.4 m) tall with the operators feet planted on the ground no ladder to haul from post to post. The driver runs with the handle in either the up or down position, and its 3.25 in. (82 mm) ID chuck accommodates posts up to 3 in. (76 mm) in diameter.

Three patented adapters at 1.75, 2 and 2.5 in. (44, 51 and 63 mm) align smaller posts in the chuck for driving efficiency and quick removal, and 2.7 oz of oil comes in the box. For shorter fence lines and posts under 2 in., the standard Minuteman post driver is the lighter pick. Browse the rest of our post drivers and pounders, and add a post puller when extraction is part of the job.

  • On-board rotating extension handle drives posts up to 8 ft (2.4 m) tall without a ladder
  • Operates with the extension handle in either the up or down position
  • 3.25 in. (82 mm) ID chuck accommodates fence posts up to 3 in. (76 mm) in diameter
  • Includes three patented adapters at 1.75, 2 and 2.5 in. (44, 51 and 63 mm) for alignment and quick removal
  • Safer and faster than ladder work no repositioning a ladder between posts
  • Ships with 2.7 oz of oil for the impact mechanism
  • Stocked by Crowder Supply in Denver with free UPS Ground shipping

Specifications

SKU
Product Name
Chuck Size (in)
Power Source
Fuel Capacity (gal)
Fuel
Engine
Impact Rate (bpm)
Engine Oil
Lubricant
Tool Weight (lb)
Length (in)
Width (in)
Height (in)
RMM350010
Minuteman XL8 Gas Powered Post Driver
3-1/4
Gas
0.67
Unleaded Gas, 86 octane or higher
4-Stroke (in) (No Mix), 37.7 cc, 1.6 HP
1720
SAE 10W-30
EP 0 Low Viscosity Grease
53
17
11
24

Information

Documents