The master chuck is the starting point of every Rhino PD-200 post driving setup the component that seats over the post head and channels the driver’s energy into the post. Matching chuck to post keeps the full impact force on the centerline, and this page carries the whole PD-200 range: round chucks from 4 in. to 7 in., square chucks, wood and H-column patterns, and the slotted sheet pile chuck.

Round sizes run 4, 4-1/4, 4-3/4, 5-1/2 and 7 in.; square chucks come in 4 and 6 in.; the 4×6 wood chuck cradles timber to limit splitting, the H-column 4×6 chuck captures web and flanges on structural H-pile (it requires the matching drive cap), and the slotted chuck engages sheet pile interlocks. Browse the rest of the PD chucks and adapters, or compare drivers on the Rhino pneumatic post drivers page.

• Fits the Rhino PD-200 heavy-duty pneumatic post and pile driver
• Round chucks: 4 in., 4-1/4 in., 4-3/4 in., 5-1/2 in. and 7 in. for round posts, pipe and pile
• Square chucks in 4 in. and 6 in. keep square stock from spinning or walking under impact
• 4×6 wood master chuck spreads force across the post head to limit splitting and brooming
• H-column 4×6 chuck seats over web and flanges for structural H-pile; requires the matching drive cap
• Slotted sheet pile chuck engages the interlock to hold sheets plumb along the wall line
• Stocked by Crowder Supply in Denver in the popular patterns