TEHMA PP600 & PP700 Hydraulic Power Packs
The engine room of every TEHMA tool: compact two-stage hydraulic power units that push 10,150 psi (700 bar) to splitters, the CC300 crusher, and the shears — with electric, pneumatic, gas, and carrier-hydraulic motors to match any jobsite. Sold in kits or on their own; many crews run one pack across a whole TEHMA fleet.
The short version
Two packs, six motors. The PP600 (from $8,530) is the standard: hydraulic, electric, electric-with-cooling, or pneumatic. The PP700 High Flow (from $10,740) moves 70% more first-stage oil for faster cycles — gas or electric. Buying a splitter too? The kits bundle pack, tool, and hoses. Browse all power packs we stock, or call 1-888-883-5144.
Which Motor for Your Site?
Every TEHMA tool runs from the same two-stage 10,150 psi (700 bar) packs: a high-flow first stage races the wedge or jaw to the work, then the high-pressure stage delivers the splitting force. Pick the motor that matches your jobsite power.
Electric
Ordinary 110–120V @ 25A — indoors, at night, underground. Cooling System 2.0 versions cut oil overheating by about 60% on long shifts and in hot climates.
PP600 EC · PP700 EPneumatic
Plant air or a 127 CFM @ 100 psi compressor — mines, refineries, and spark-sensitive sites.
PP600 AHydraulic
The PP600-H runs off a carrier’s auxiliary hydraulic circuit — no motor of its own to maintain.
PP600 HThe Packs
PP600 Power Pack
The standard pack for the whole TEHMA line, and the lightest — 83.8 lb in pneumatic trim. Four motors: hydraulic, electric, electric with cooling, and pneumatic.
Choose it when: you run one tool at a normal pace and want the lightest, least expensive pack — or you need the pneumatic or carrier-hydraulic motor only the PP600 offers.
Key specs
PP700 High Flow Power Pack
The production pack: 2.4 GPM of first-stage flow — 70% more than the PP600 — so every cycle starts sooner and crews finish more splits per shift. Gas (Honda GX160) or electric with Cooling System 2.0.
Choose it when: cycle speed pays your bills — production splitting, the SP600 on thick sections, or any crew waiting on wedge travel.
Key specs
PP-Series Factory Specifications
| Model | Motor | Power | Weight | Max pressure | Dimensions (L x W x H) |
|---|---|---|---|---|---|
| PP600 A | Pneumatic — 127 CFM @ 100 psi | 4.0 HP (3.0 kW) | 83.8 lb | 10,150 psi (700 bar) | 20.5 x 14.2 x 20.4 in. |
| PP600 EC | Electric, single-phase 110–120V @ 25A, w/ cooling | 3.0 HP (2.2 kW) | 102.5 lb | 10,150 psi (700 bar) | 21.0 x 14.2 x 20.2 in. |
| PP700 S | Gasoline — Honda GX160 | 4.8 HP (3.6 kW) | 124.0 lb | 10,150 psi (700 bar) | 33.9 x 15.7 x 19.5 in. |
| PP700 E | Electric, single-phase 110–120V @ 25A, w/ cooling | 3.0 HP (2.2 kW) | 129.4 lb | 10,150 psi (700 bar) | 33.9 x 15.7 x 19.5 in. |
Swipe sideways to see the full table.
The PP600 is also available with an electric motor without cooling ($8,940) and as the PP600-H hydraulic version ($8,530) that runs off a carrier’s auxiliary circuit — both in the widget above. Flow rates: PP600 1.4 GPM low stage / 0.3 GPM high stage; PP700 2.4 GPM low stage / 0.3 GPM high stage.
Keep Your Pack Running
PP600 seal kits and other service parts are available — call 1-888-883-5144 with your serial number.
Power Pack Questions
What does a TEHMA power pack do?
It is the hydraulic power unit that drives every TEHMA tool. A two-stage pump sends high-flow, low-pressure oil to advance the wedge or jaw quickly, then automatically shifts to the high-pressure stage — up to 10,150 psi (700 bar) — to deliver the splitting or crushing force. One pack runs the SP-series splitters, the CC300 crusher, and the MS250/GS170 shears, one tool at a time.
What is the difference between the PP600 and the PP700?
First-stage flow. The PP600 moves 1.4 GPM; the PP700 High Flow moves 2.4 GPM — 70% more — so the wedge or jaw reaches the work noticeably sooner on every cycle. Both develop the same 10,150 psi. Occasional use favors the lighter, less expensive PP600; production splitting and the SP600 favor the PP700.
What power does the electric version need?
Ordinary single-phase 110–120V at 25 amps — household or jobsite panel power, no three-phase service required. That is what makes electric packs the choice for indoor, night, underground, and occupied-building demolition. The Cooling System 2.0 models cut oil overheating by about 60% for long shifts and hot climates.
How much air does the pneumatic PP600 A need?
127 CFM at 100 psi — plant air in a mine or refinery, or a towable compressor. The pneumatic motor has no spark or exhaust, which is why gassy underground and spark-sensitive industrial sites spec it.
Can one pack run more than one tool?
One tool at a time out of the box. Add the multiplier module — a 2- or 3-channel manifold from $1,210 — and one pack feeds two or three tools for crew work.
Should I buy the pack alone or in a kit?
If you are buying your first splitter, the kit is the better order: splitter, pack, and hoses arrive matched and ready to run from $22,595. Buy the pack alone when you are adding capacity to an existing TEHMA fleet, replacing a motor style, or running the CC300 crusher or shears you already own.
Match a Pack to Your Tools
Tell us what powers your site — wall outlet, plant air, or nothing at all — and we will spec the right motor and flow for your splitter or crusher.