The Rhino PD-140 Fence Post Kit bundles everything needed to put the PD-140 pneumatic post driver to work: the 139 lb driver with its standard 4-1/4 in. I.D. master chuck, a throttle valve kit with 5 ft hose whip, a filter-regulator-lubricator with carrier and hose to keep the air clean and the tool oiled, a 15 ft hose whip assembly and 1 gallon of rock drill oil. Chuck adapters for additional post styles are sold separately.
The PD-140 draws 64 CFM at 90 psi and delivers up to 1,700 blows per minute, driving guardrail posts and other heavy-duty sections while remaining liftable by two people with no extra equipment. Bolt-on adapters extend it to ground rods, T posts, Telespar and channel posts, form pins, tent stakes, dock piles and pipe up to 4 in. Compare bundles in our PD-140 kit lineup, restock rock drill oil as the gallon runs down, or start with the Rhino post driver buyer’s guide.
- Includes the PD-140 pneumatic post driver with standard 4-1/4 in. I.D. master chuck
- Throttle valve kit with 5 ft hose whip plus a separate 15 ft hose whip assembly
- Filter-regulator-lubricator with carrier and hose maintains compressed-air quality and proper lubrication
- 1 gallon of rock drill oil included; chuck adapters for other post styles sold separately
- Driver specs: 139 lb with alloy steel piston, 64 CFM at 90 psi, up to 1,700 blows per minute
- With adapters, drives guardrail posts, T posts, Telespar and channel posts, ground rods, form pins, tent stakes, dock piles and pipe to 4 in.
- Kit assembled and stocked by Crowder Supply in Denver
