Tehma Hydraulic Concrete & Rock Splitters

Break boulders, foundations, and reinforced concrete from the inside out — no blasting, no flyrock, and little enough vibration to work right next to a standing structure. Tehma's handheld hydraulic wedge splitters seat a wedge-and-feather set in a drilled hole and split on command: the SP600 for the largest stone and the SP400 for tighter, lower-force cuts. Both run off a standard hydraulic power pack.

Showing all 3 resultsSorted by popularity

Showing all 3 resultsSorted by popularity

Silent, Controlled Splitting

A drilled bore hole, a wedge set, and hydraulic pressure do the work — quietly, with no explosives or hammering — so Tehma splitters suit demolition inside buildings, near historic structures, and in tight quarry and excavation cuts where vibration is a problem. The SP400 develops up to 600 bar (8,700 psi) through a 1-3/8 in hole.

Compare and Equip

For the C-Series alternative, see Darda rock splitters; for crushing reinforced structures instead of splitting rock, the concrete crushers and metal shears cut walls and rebar. Drill the bore holes with a rock drill, and browse all concrete and rock splitters.