Atlas Copco DOP 15N Air-Operated Double Diaphragm Pump
When the job is too dirty for a centrifugal pump, the DOP 15N keeps working. It handles heavily polluted, viscous and abrasive fluids such as muddy water, sludge, slurry and drilling fluid. Its nitrile rubber diaphragm and valve flaps make it a strong all-round choice for construction, mining and industrial dewatering.
Features
- Fully submersible: a built-in non-return valve lets the pump run submerged and in any orientation.
- Self-priming: no manual priming is needed, even in rough conditions.
- Handles solids: the base strainer passes particles up to 1.2″ (30 mm) and stops anything larger.
- Clean air intake: a screened air inlet keeps contaminants out of the air side.
- High head: up to 193 ft (59 m) of lift. For more head, connect several DOP pumps in series.
- Reaches tight spots: a pivoting intake coupling and optional suction hose reach liquid in corners and pits.
- Less hose stress: a pivoting discharge connection reduces strain on the hose.
- One-person portable: weighs just 68 lb with a built-in carry handle.
- No electricity required: air-powered operation suits wet and hazardous work areas.
Typical Applications
Construction site and excavation dewatering, mine and tunnel drainage, sump and pit pumping, sludge and slurry transfer, and industrial wastewater handling.
Specifications
| Specification | Value |
|---|---|
| Model | DOP 15N |
| Part Number | 8492 0101 48 |
| Pump Type | Air-operated double diaphragm, submersible |
| Max. Flow | 110 GPM (420 L/min) |
| Max. Head | 193 ft (59 m) |
| Max. Solids | 1.2″ (30 mm) |
| Air Consumption | 72 CFM @ 90 PSI |
| Fluid Inlet / Outlet | 2-1/2″ |
| Air Inlet | 3/4″ |
| Diaphragm & Valves | Nitrile rubber (NBR) |
| Dimensions (L W H) | 15″ 13″ 23″ |
| Weight | 68 lb (31 kg) |


