The Chicago Pneumatic RDR 48M is a handheld hydraulic rock drill that uses oil power for both impact and rotation, drilling holes up to 2 in. diameter and roughly 20 ft deep with standard integral steel. Fed by a hydraulic power pack or a carrier’s auxiliary hydraulic circuit, it gives contractors and utilities efficient blast, anchor and rock-splitting holes without a large compressor on site.
The 48M runs 2,550 BPM and 400 RPM counterclockwise rotation on 5.5 GPM at 1,4502,030 PSI working pressure, weighs 53 lb, and carries a 7/8 x 4-1/4 in. chuck; a small compressor is still needed for hole flushing. It skips the big air demand of the pneumatic drills we stock our article on how to choose a rock drill and the full Chicago Pneumatic drill lineup cover where each fits.
- Hydraulic impact and rotation: 2,550 BPM with 400 RPM counterclockwise (CCW) rotation
- Drills holes up to 2 in. diameter and approximately 20 ft deep with standard integral steel
- Oil requirement: 5.5 GPM at 1,4502,030 PSI working pressure; max return pressure 218 PSI
- 53 lb tool weight, 24 in. length, 7/8 x 4-1/4 in. chuck
- Small auxiliary compressor required for flushing cuttings from the hole
- RDR 48R rig version (no handles, dual connection block) available for custom drill-rig mounting
- Applications: blast holes, anchor holes and rock-splitting holes for contractors and utilities
- Stocked by Crowder Supply in Denver; free UPS Ground shipping
