The Guide Tube Adapter with Tamper Kit is the required companion for 80 lb class handheld hydraulic post drivers, guiding the post squarely under the tool as it drives. It fits the Atlas Copco LPD-HD and the Chicago Pneumatic PDR 95R, and each kit includes the guide tube adapter, a 1-1/4 in. x 6 in. detachable shank and a large tamper pad.

Three guide tube sizes cover posts from 2-3/4 to 3-1/2 in., 3-3/4 to 4-1/2 in., and 4-3/4 to 5-1/2 in. OD pipe and pile, signposts, fence posts and anchors while the included tamper pad converts the same driver for tamping backfill around the finished post. Drive caps and other tooling for these drivers are gathered under AC/CP hydraulic post driver accessories, and you can compare the drivers on the Chicago Pneumatic hydraulic post drivers page.

• Fits Atlas Copco LPD-HD and Chicago Pneumatic PDR 95R handheld hydraulic post drivers
• Required with these powerful drivers to guide the post properly during driving
• Kit includes guide tube adapter, 1-1/4 in. x 6 in. detachable shank and large tamper pad
• Three sizes: 2-3/4 to 3-1/2 in., 3-3/4 to 4-1/2 in., and 4-3/4 to 5-1/2 in. post OD
• Drives pipe and piles from 2-3/4 in. to 5-1/2 in. OD plus signposts, fence posts and anchors
• Stocked by Crowder Supply in Denver for the 80 lb class hydraulic driver family