The Rhino Pile Lift Kit puts a magnetic lift assist on the Solar Pro and Guardrail Pro pile driver attachments, helping the operator bring each pile from the ground to vertical without wrestling it upright by hand. The magnet carries a 1,378 lb rated lift strength with 550 lb maximum pull-off strength, and its single-leg lift chain is rated for a 2,700 lb working load limit pulling at 90 degrees.

The kit attaches to the pile, takes the strain of pile lifting and positioning, and comes off just as quickly for transport a productivity and safety upgrade for solar-field and guardrail production driving. It sits in the Guard/Solar Pro accessory range next to the pile puller kit for extraction work; for the carrier-mounted family as a whole, browse mounted post drivers.

• Fits Rhino Solar Pro and Guardrail Pro pile driver attachments; Rhino part 360270
• Magnetic lift assist rated at 1,378 lb lift strength with 550 lb maximum pull-off strength
• Single-leg lift chain carries a 2,700 lb working load limit when pulling at 90 degrees
• Helps the operator move piles from ground to vertical for faster, safer positioning
• Removes easily when not in use or during transport between sites
• Stocked by Crowder Supply in Denver, Colorado