The Rhino GPD-30 Ranch Pro is a 36 lb single-operator gas powered post driver the lightest model in the Rhino gas post driver Pro Series built for T-posts, ground rods, form pins and round posts up to 1-5/8 in. With a Honda GX35 4-stroke delivering 1,720 blows per minute and no compressor or hose to stage, it suits fence, ranch, vineyard and erosion-control work spread across a property.

The 1-3/4 in. I.D. master chuck ships with a 1 in. adapter, so the Ranch Pro doubles as a gas powered ground rod driver for electrical and fence-energizer work the ground rod installation tool kit rounds out that setup. When jobs call for bigger posts, step through the rest of our post drivers and pounders, or let the Rhino post driver buyers guide point you to the right model.

• Honda GX35 4-stroke, 35.8cc OHC single-cylinder engine runs on straight unleaded gasoline with no fuel-oil mix
• 1,720 BPM blow rate drives T-posts, ground rods, form pins and 1 to 1-5/8 in. round posts
• 1-3/4 in. I.D. master chuck with 1 in. adapter included for ground rod work
• 36 lb fueled (33 lb dry) the lightest single-operator driver in the Rhino Pro Series gas lineup
• CIS Compression Isolation System and padded grips reduce hand-arm vibration on long fence and ag shifts
• Cast aluminum body, S-7 tool steel impact components and stainless fasteners, built in Kewanee, Illinois
• Honda 2-year residential / 1-year commercial engine warranty plus Rhino Lifetime Impact Warranty
• Stocked by Crowder Supply in Denver with free UPS Ground shipping to the lower 48

Ranch Pro FAQ

Will the Ranch Pro drive ground rods?
Yes with the included 1 in. adapter, the GPD-30 doubles as a gas powered ground rod driver for electrical and fence-energizer work, no sledgehammer, ladder or compressor required.

What posts fit the GPD-30?
The 1-3/4 in. I.D. master chuck drives T-posts, form pins, ground rods and round posts from 1 to 1-5/8 in., with the 1 in. adapter included in the box.

Ranch Pro vs. Fence Pro which one do I need?
Both run the same Honda GX35 engine. The Ranch Pro is the lighter tool for T-posts, ground rods and smaller round posts; the Fence Pro GPD-40‘s larger 2-1/2 in. master chuck handles bigger round and wood posts.

Does it need mixed fuel?
No. The Honda GX35 is a 4-stroke it runs on straight unleaded gasoline, 86 octane or higher, with no fuel-oil mix and carries Honda’s 2-year residential / 1-year commercial engine warranty alongside the Rhino Lifetime Impact Warranty.