The Relton Tip Top is a carbide-tipped masonry drill bit for rotary-only drilling the bit to chuck in a standard drill motor when the job is brick, block, stone or concrete and no hammer drill is on hand. Point diameters run 1/8 in. through 1 in. on 3/16 to 1/2 in. shanks, with drilling depths from 1-3/4 in. to 16 in.
A precision-ground carbide tip starts accurately without wandering, and the fluted body lifts dust out of the hole to keep the cut clean and cool. With the right speed and technique it also puts clean holes in ceramic and porcelain tile. For percussion drilling, its stablemate the Ram Tip runs in rotating-vibrating hammers and the four-cutter R4X takes on reinforced concrete see the full electric hammer tool range.
- Point diameters 1/8 in. through 1 in. on 3/16 to 1/2 in. shanks
- Drilling depths from 1-3/4 in. to 16 in. for shallow fastener and deep through-holes
- Tungsten carbide tip for rotary-only drilling in brick, block, stone and concrete
- Precision-ground tip starts accurately and resists bit wandering
- Drills ceramic and porcelain tile cleanly with proper speed and technique
- Stocked by Crowder Supply in Denver in the popular sizes