The Tamco/Toku TCH-3 is a 19 lb pneumatic chipping hammer whose 2-1/2 in. stroke splits the difference between a fast 2 in. scaler and a hard-hitting 4 in. tool, cycling 2,000 to 2,200 BPM through a 1-1/8 in. piston. A four-bolt drop-forged handle, heat-treated alloy steel cylinder and replaceable chuck bushing make it the mid-stroke pick among the pneumatic chipping hammers Crowder Supply stocks.
Choose the .580 in. hex or .680 in. round chuck on this page to match your steel; a moil point and a flat chisel cover most concrete and masonry days. Feed it oiled air through an in-line lubricator to protect the piston, and if you are still weighing stroke lengths, the chipping hammer buyers guide lays out where a 2-1/2 in. stroke earns its keep.
- 2-1/2 in. stroke through a 1-1/8 in. piston at 2,0002,200 BPM balances blow rate and blow energy
- Chuck options: .580 in. hex or .680 in. round with replaceable bushing
- Air consumption 3032 CFM at 90 PSI; 7/8-24 female inlet takes a 1/2 in. hose
- Four-bolt drop-forged handle, heat-treated alloy steel cylinder and exhaust deflector as standard
- 1819 lb tool weight, 15 in. overall length
- Applications: scaling, chiseling, surface prep and light demolition in concrete, masonry and metal cleaning
- Built by Toku, the Japanese pneumatic-tool manufacturer behind a deep catalog of industrial chipping and demolition tools
- Stocked in Denver by Crowder Supply with free UPS Ground shipping
TCH-3 FAQ
What steel fits the TCH-3?
Order it with a .580 in. hex or .680 in. round chuck and run matching-shank chipping hammer chisels; the standard retainer is an oval collar with spring, and the chuck bushing is replaceable.
How much air does it use?
3032 CFM at 90 PSI through a 7/8-24 female inlet on a 1/2 in. hose feed it oiled air to protect the 1-1/8 in. piston.
Who makes Tamco/Toku tools?
Toku is a Japanese pneumatic-tool manufacturer with a deep catalog of industrial chipping, riveting and demolition tools; Tamco/Toku is the badge its chipping hammers carry here.
