The Rhino HPD-60 is a 60 lb handheld hydraulic post driver the flagship of the Rhino hydraulic post driver line that sinks fence posts, T-posts, sign posts and guardrail posts at 1,380 blows per minute with 95 joules (about 70 ft-lb) per blow. Its closed hydraulic system keeps hitting in rain and below-freezing weather that would ice up an air tool, and three-axis vibration under 9.6 m/s extends allowable daily trigger time.

Oil comes from a Rhino HPP 14 power pack at 8 GPM, or from a skid steer, mini excavator or utility truck auxiliary circuit through the HPD-60 oil flow divider. Two selectable master chucks 2-1/2 in. and 3-7/8 in. take Chuck-Lok and PD-55 adapters, so gas, air and hydraulic Rhino drivers share one adapter inventory; the Rhino post driver buyers guide compares all three power sources.

• 1,380 BPM at 8 GPM oil flow and 1,750 PSI working pressure; 220 PSI maximum return line pressure
• 95 joule (approximately 70 ft-lb) blow energy for fence, sign and guardrail posts
• Closed hydraulic system operates in rain and below-freezing conditions without icing
• Three-axis vibration under 9.6 m/s helps extend allowable trigger time under HAVS exposure rules
• 2-1/2 in. or 3-7/8 in. master chuck; the 3-7/8 in. chuck accepts PD-55 and Chuck-Lok adapters for shared fleet inventory
• Ships complete with master chuck, whip hoses, flat-face quick connects and trigger valve
• 60 lb tool weight, 26 in. long; nitrogen accumulator charged at 730 PSI
• Stocked by Crowder Supply in Denver with free UPS Ground shipping