The Rhino Solar Pro (P/N 360001) and Guardrail Pro (P/N 360002) are skid steer pile driver attachments built in Kewanee, Illinois for large-volume mounted driving — solar farm pile installation, highway guardrail post replacement, and production piling work. A Furukawa Fx 55 hydraulic hammer delivers 800 ft-lb (1,085 J) per stroke at 500–1,000 BPM, and the omni-adjustable mast keeps every pile plumb on terrain that is anything but.

Pick the configuration on this page: the Solar Pro (3,000 lb) handles piles up to 15 ft tall on a 10 in. x 7.25 in. anvil for ground-mount solar racking, while the Guardrail Pro (2,600 lb) runs posts up to 8.5 ft with dedicated guardrail adapters and guide plates. Both mount to most carriers with a universal skid-steer plate — custom plates available — and the mono-block design has only two moving parts to maintain.

• Skid-steer mounted pile driver attachment; omni-adjustable mast for plumb installation on uneven terrain
• Furukawa Fx 55 hydraulic hammer delivers 800 ft-lb (1,085 J) of impact energy per stroke at 500–1,000 BPM
• Mast tilts 2° right, 90° left, 10° front and back; attachment shifts 10 in. front/back and 24 in. left/right
• Solar Pro: piles up to 15 ft tall, 10 in. x 7.25 in. anvil footprint, for ground-mounted solar racking
• Guardrail Pro: posts up to 8.5 ft tall, 8 in. x 7.25 in. anvil, with dedicated guardrail adapters
• Carrier requirements: 10,000 lb minimum operating weight, 3,000 lb rated operating capacity, 1,740–2,320 PSI, 10.5–22.5 GPM
• Mono-block design with only two moving parts — minimal grease points, low-maintenance jobsite life
• Universal skid-steer mounting plate fits most carriers; custom mounting plates available on request
• Two-year warranty on the Furukawa hydraulic hammer

What Your Skid Steer Needs

Plan the carrier before the attachment arrives: a minimum 10,000 lb operating weight and 3,000 lb rated operating capacity, with auxiliary hydraulics delivering 10.5–22.5 GPM at 1,740–2,320 PSI. Add a hydraulic hose set with quick connects sized to your carrier — available in 25 ft and 40 ft lengths from Crowder Supply — and the attachment couples to most machines with the universal mounting plate.

Solar Pro / Guardrail Pro FAQ

Solar Pro or Guardrail Pro — which configuration?
Solar Pro for ground-mount solar: 15 ft pile capacity and the larger anvil for racking piles at production rates. Guardrail Pro for highway work: 8.5 ft post capacity, guardrail adapters, and guide plates for S3 x 5.7 I-beam and common guardrail profiles.

Can it pull piles too?
Yes — the pile puller kit converts either configuration for extraction and solar-site remediation, and the pile lift kit handles positioning.

What if I don't have a big enough skid steer?
For guardrail repair and short runs without a 10,000 lb carrier, the handheld PD-200 pneumatic driver in its 4×6 guard rail configuration drives the same posts one at a time.

What else drives posts at machine scale?
See every truck- and carrier-mounted option in mounted post drivers, or compare the full Rhino lineup from handheld to skid-steer scale.

The Solar Pro and Guardrail Pro are the carrier-mounted end of the Rhino skid steer pile driver range; for handheld work, see our mounted post drivers alongside the full post driver selection. Guard/Solar Pro accessories cover chucks and wear parts.