The Epiroc Post Driver Pad is the ClassicLine post driver pad for Epiroc SB hydraulic breakers (SB 52, SB 102, SB 152, SB 202, SBU 220, SB 302, SBU 340, SB 452, SB 552 and SB 702), listed by the breaker it fits. It mounts on the Epiroc shaft for pads for the same breaker (sold separately) and is used for driving posts, which sit inside the pad’s bore. Diameters run 3.94–7.87 in.

Pads and shafts turn an SB breaker into a tamper, post driver or pile driver without changing the carrier. Grease the bushing with Epiroc chisel paste at regular intervals. Moil points, chisels and blunt tools for the same breakers are under Epiroc working tools; the breakers are under Epiroc hydraulic breakers.

• Fits Epiroc SB 52, SB 102, SB 152, SB 202, SBU 220, SB 302, SBU 340, SB 452, SB 552 and SB 702 hydraulic breakers; select the breaker model
• Diameters 3.94–7.87 in.; ClassicLine
• Requires the Epiroc shaft for pads for the same breaker (sold separately)
• Use: driving posts, which sit inside the pad's bore
• The post sits inside the pad's bore (inner diameter per size)
• Genuine Epiroc parts from Crowder Supply, a stocking Epiroc dealer in Denver; ships UPS Ground