The Texas Pneumatic TXCH2 is a 2-cylinder pneumatic chipping hammer whose 2 in. piston stroke hits 2,100 BPM a faster, lighter-hitting alternative to the 3 in. TXCH3 for scaling, chiseling, cement finishing and surface preparation. Choose a .580 in. hex or .680 in. round bushing, in the heavy-duty 4-bolt back-head at 18 lb or the standard 2-bolt frame; Texas Pneumatics chipping hammer catalog pairs the two strokes for a reason.

Buy the 4-bolt configuration and the accessories come with it: a 1291-TPT2 deluxe quick-change retainer, an in-line lubricator with hose whip, a 12 in. moil point and a 12 in. flat chisel, plus a hose swivel so the airline follows the operator. Air demand is 33 CFM at 90 PSI on a minimum 1/2 in. hose. Replacement steel such as the 2 in. chipping hammer chisel is on the shelf in Denver, and the buyers guide compares the 2 in. stroke against the rest of our chipping hammer lineup.

• 2 in. stroke, 1-1/8 in. bore and 2,100 BPM quick cycling for scaling, weld dressing and cement finishing
• Bushing options: .580 in. hex or .680 in. round
• Air consumption 33 CFM at 90 PSI; minimum 1/2 in. hose recommended
• 4-bolt model: 18 lb, 14-1/2 in. overall, includes quick-change retainer, lubricated hose whip, moil point and flat chisel
• Standard 2-bolt model runs the same mechanism in a lighter, lower-cost handle frame
• 4-bolt design extends handle life; hose swivel lets the air hose track operator movement
• Stocked in Denver by Crowder Supply with free UPS Ground shipping