The Texas Pneumatic TXCH3 is a 3-cylinder pneumatic chipping hammer with a 3 in. piston stroke and a .580 in. hex or .680 in. round bushing, built for scaling, chiseling, cement finishing, surface preparation and light demolition. It runs 1,650 BPM on 34 CFM at 90 PSI and comes as a heavy-duty 4-bolt back-head at 19 lb or a lighter standard 2-bolt frame, part of the US-built Texas Pneumatic chipping hammer line.
The 4-bolt version ships job-ready: a 1291-TPT2 deluxe quick-change retainer, an in-line lubricator with hose whip, a 12 in. flat chisel and a 12 in. moil point are in the box, and a hose swivel lets the airline track operator movement. Run it on a minimum 1/2 in. hose. The chipping hammer buyers guide explains how the 3 in. stroke compares with shorter, faster-hitting models across our chipping hammer range.
- 3 in. stroke, 1-1/8 in. bore and 1,650 BPM the longer stroke favors harder chipping over fine surface work
- Bushing options: .580 in. hex or .680 in. round to match your existing chisel inventory
- Air consumption 34 CFM at 90 PSI; minimum 1/2 in. air hose recommended
- 4-bolt model: 19 lb, 15-1/2 in. overall, with quick-change retainer, lubricated hose whip, moil point and flat chisel included
- Standard 2-bolt model offers the same mechanism in a lighter, lower-cost handle frame
- Hose swivel keeps the air hose tracking with the operator instead of twisting
- Stocked in Denver by Crowder Supply; free UPS Ground shipping
