Atlas Copco Post Pullers — The LPP 10HD Hydraulic Puller
Ten tons of straight-up extraction: the LPP 10HD grips any post, tube, or beam to 8 in. with an integrated self-tightening jaw and walks it out of the ground in strokes — wooden posts, steel profiles, fence, and anchors, without a machine or a chain-and-bucket gamble.
The short version
The LPP 10HD runs off the same LP power pack as your LPD driver — drive and pull with one hydraulic system. Manual and hydraulic pullers across brands are at the post driving category, including the Rhino PL-3 and MP-3.
The Machine
LPP 10HD Hydraulic Post Puller
An integrated jaw with automatic chain tightening clamps posts to 8 in. diameter; each stroke lifts up to 8 in. with 6.6 tons of continuous pull and 11 tons at full effort. Wooden posts, steel IPE/HPE/UPE profiles, round and square tube, fence posts, and anchors all come out clean enough to reuse the hole.
Choose it when: you remove posts, guardrail, sign structures, or anchors at any volume — one operator, no machine.
Key specs
Post Puller Questions
What can the LPP 10HD pull?
Any pole, beam, or tube up to 8 in. diameter: wooden fence posts, steel sign posts, IPE/HPE/UPE profiles, guardrail posts, ground anchors, and form stakes. The jaw self-tightens as load increases, so slick steel does not slip.
What powers it?
Any 5.3–10.6 GPM (20–40 lpm) hydraulic source — an LP power pack or machine auxiliaries, EHTMA class C through E. If you run an LPD post driver, the same pack powers both ends of the job.
Why not just yank posts with a machine?
Chain-and-bucket pulls bend posts, tear ground, and hurt people when chains let go. A vertical 10-ton stroke pull is controlled, reusable-hole extraction — and it works where no machine fits.
How fast does it ship?
In stock — free UPS Ground, same day on orders by 4 PM Eastern.
Pull It Straight, Reuse the Hole
One call pairs the puller with the pack you already own.