The Rhino PD-200 Utility Kit builds a heavy-duty driving package around the PD-200 pneumatic driver fitted with its 7 in. master chuck for large-diameter pipe and tubing, heavy timber posts and structural stakes. Alongside the roughly 170 lb driver come a throttle valve kit with 5 ft hose whip, a filter-regulator-lubricator with carrier, a 15 ft 2 in. hose whip and one gallon of rock drill oil.
This bundle also packs the MP-3 manual post puller for extraction tasks, a fit for contractors and rental fleets that drive and pull big posts in tough soils and deep drives. The driver hits approximately 900 BPM on 72 CFM at 100 PSI, and chuck adapters, sold separately, match the 7 in. chuck to your post size. Compare configurations across the PD-200 kit lineup, or start from the Rhino buyers guide.
- PD-200 heavy-duty pneumatic driver included with 7 in. master chuck for large posts and tubing
- Approximately 170 lb driver delivering roughly 900 BPM on 72 CFM at 100 PSI
- Includes throttle valve kit with 5 ft hose whip, FRL with carrier and 15 ft 2 in. hose whip
- MP-3 manual post puller for extraction tasks and one gallon of rock drill oil in the box
- Chuck adapters sold separately to match your post or pipe size
- Suited to large-diameter pipe posts, heavy timber, structural members, guardrail and anchor posts in tough soils
- Kit assembled and stocked by Crowder Supply in Denver
