The Rhino PD-200G Guardrail Post Driver Kit puts everything needed to run the PD-200 pneumatic post driver on one purchase order: the 170 lb driver with its 4 x 6 in. master chuck, a 4 x 6 H-column guard rail drive cap, a throttle valve kit with 5 ft hose whip, a filter-regulator-lubricator with carrier and hose, a 15 ft hose whip assembly and one gallon of rock drill oil.

The PD-200s alloy steel piston delivers approximately 900 BPM on 72 CFM of air, sinking 4 x 6 guardrail posts and other heavy posts with a tool two people can lift no truck-mounted rig required. Bolt-on adapters, sold separately among the PD chucks and adapters, extend it from ground rods to 7 in. pipe and dock piles. Other bundles live under PD-200 kits, and the Rhino post driver buyers guide compares every model.

• Includes PD-200 pneumatic post driver with 4 x 6 in. master chuck and 4 x 6 H-column guard rail drive cap
• Throttle valve kit with 5 ft hose whip, filter-regulator-lubricator with carrier and hose, plus 15 ft hose whip assembly
• One gallon of rock drill oil included; chuck adapters sold separately
• 170 lb driver with alloy steel piston delivers approximately 900 BPM; 72 CFM air consumption
• With additional chucks and adapters covers ground rods, tent stakes, form pins, T-posts, Telespar and channel posts, pipe up to 7 in. and dock piles
• No additional equipment required on site the driver can be lifted by two people
• Kit assembled and stocked by Crowder Supply in Denver