The Epiroc Shaft for Pad is the ClassicLine shaft for Epiroc SB hydraulic breakers (SB 52, SB 102, SB 152, SB 202, SBU 220, SB 302, SBU 340, SB 452, SB 552 and SB 702), listed by the breaker it fits. The shaft sits in the breaker’s tool bushing in place of a working tool and carries the Epiroc pads: round bushing pad, pile driver pad, post driver pad and square tamping pad, each sold separately. Total lengths run 16.5–37.4 in.

Pads and shafts turn an SB breaker into a tamper, post driver or pile driver without changing the carrier. Grease the bushing with Epiroc chisel paste at regular intervals. Moil points, chisels and blunt tools for the same breakers are under Epiroc working tools; the breakers are under Epiroc hydraulic breakers.

• Fits Epiroc SB 52, SB 102, SB 152, SB 202, SBU 220, SB 302, SBU 340, SB 452, SB 552 and SB 702 hydraulic breakers; select the breaker model
• Total lengths 16.5–37.4 in.; ClassicLine
• Carries the round bushing pad, pile driver pad, post driver pad and square tamping pad (sold separately)
• Use: carrying any of the Epiroc pads in the breaker's tool bushing
• Fits the breaker's tool bushing in place of a working tool
• Genuine Epiroc parts from Crowder Supply, a stocking Epiroc dealer in Denver; ships UPS Ground