Air powered, venturi type pipe line blowers specifically adapted to API (American Petroleum Institute) flange plates. These pipe line blowers are used to blow down pipe lines prior to maintenance and can be adapated to any API flange from 4" to 24".
Part No.
Description
Dia. of Base (in)
Inlet NPT (in)
Bolt Circle Dia. (in)
Base Slot Dia. (in)
Price
TXPLB3
3" Pipe Line Blower
7.31
1/2
6.56
.40
$510.00
3" Pipe Line Blower with a 3" male pipe thread (MPT) x 2" female pipe thread (FPT) bushing & TX-3AM-P air mover. The 3" API flange (AM52) is attached to the base of the TX-3AM-P air mover with three - 5/16"-18 thread stainless socket head cap screws. The flange has 3" female pipe threads on it's inside diameter. A 3" MPT x 2" FPT Bushing (TX-10046) comes with the unit and allows it to be used with 2" pipe. This unit is designed to pull air from a tank or pipe line via a 2" or 3" pipe connection.
Part No.
Description
Length (in)
Weight (lb)
Dia. of Base (in)
Inlet NPT (in)
Bolt Circle Dia. (in)
Base Slot Dia. (in)
Price
TXPLB4
4" Pipe Line Blower
11.25
11.35
7.25
1/2
6.56
.40
$550.00
4" Pipe Line Blower that connects directly to a 4" API flange plate. It is designed to blow air into the pipeline, and is capable of ventilating very long pipeline sections.
Part No.
Description
Length (in)
Weight (lb)
Dia. of Base (in)
Inlet NPT (in)
Bolt Circle Dia. (in)
Base Slot Dia. (in)
Price
TXPLB6
6" Pipe Line Blower
13
26.3
11.25
1
10.5
.40
$745.00
6" Pipe Line Blower that connects directly to a 6" API flange plate. It is designed to blow air into the pipeline, and is capable of ventilating very long pipeline sections.
Part No.
Description
Length (in)
Width (in)
Height (in)
Weight (lb)
Dia. of Base (in)
Inlet NPT (in)
Bolt Circle Dia. (in)
Base Slot Dia. (in)
Price
TXPLB8
8" Pipe Line Blower
15
15
21
52
14.25
1
13
.5
$1,440.00
8" Pipe Line Blower that connects directly to a 8" API flange plate. It is designed to blow air into the pipeline, and is capable of ventilating very long pipeline sections.