The Tamco/Toku TPB-30 is the lightest tool in the TPB progression a 30 lb-class pneumatic paving breaker the 30 pound jackhammer of the range weighing 33 lb, built to the Toku heavy-duty industrial standard for sidewalk and curb concrete, light slab demolition, asphalt patch work, foundation chipping and utility trenching where operator fatigue limits productivity. A 1-3/4 in. bore cycling a 3-11/32 in. stroke turns 49 CFM at 90 psi into a quick 1,550 BPM.

At 22-1/4 in. overall with a 3/8 NPT inlet, it runs from modest contractor compressors, and chuck options in 7/8 x 3-1/4 in. and 1 x 4-1/4 in. hex match light breaker steels. Heavier break-out belongs to the 60 and 90 lb classes in our paving breakers & jackhammers, while surface prep and finish chipping drop down to chipping hammers. Crowder Supply stocks the whole Toku pneumatic breaker family in Denver.

• 30 lb-class pneumatic paving breaker; 33 lb tool weight, 22-1/4 in. overall length
• 1,550 BPM impact rate on 49 CFM at 90 psi through a 3/8 NPT inlet
• 1-3/4 in. bore x 3-11/32 in. stroke favors cycle speed for light break-out
• Chuck options: 7/8 x 3-1/4 in. or 1 x 4-1/4 in. hex shank
• Built by Toku, a long-established Japanese pneumatic tool manufacturer, and distributed in the U.S. by Tamco
• Applications: sidewalk and curb concrete, light slabs, asphalt patches, foundation chipping, utility trenching
• Ships free via UPS Ground from Crowder Supply in Denver

TPB-30 FAQ

Is the TPB-30 a 30 lb jackhammer?
Yes it is the 30 lb class entry in the TPB line, with an actual tool weight of 33 lb and a 22-1/4 in. overall length.

What compressor will run it?
It consumes 49 CFM at 90 psi through a 3/8 NPT inlet, well within reach of a modest contractor compressor.

TPB-30 or a chipping hammer for light concrete work?
Break-out work sidewalk, curb, light slab belongs to the breaker; surface prep and finish chipping drop down to a chipping hammer. The paving breaker buyer’s guide walks through weight classes and when to move up from 30 lb.