The paving breaker pin driver sets pins, stakes and posts with breaker power instead of sledgehammer swings: a hardened steel body with a socket end holds the pin captive and hammers it into concrete, asphalt or soil. Pin sizes run 5/8 in. through 2-1/2 in. on hex shanks of 1 x 4-1/4, 1-1/8 x 6 and 1-1/4 x 6 in., with the 2-1/2 in. size supplied as a two-piece driver.
Form pins, rebar stakes, survey markers, sign posts and guardrail hardware all go in faster under a paving breaker, and the socket keeps them straight while they drive. Rail crews run the same setup for spikes with the dedicated railroad spike driver, and the rest of our breaker driving tools cover grounding rods on matching shanks.
- Pin sizes: 5/8, 3/4, 7/8, 1, 1-1/4, 1-1/2, 1-3/4, 2 and 2-1/2 in. (2-1/2 in. is a two-piece driver)
- Hex shank options: 1 x 4-1/4, 1-1/8 x 6 and 1-1/4 x 6 in.
- Socket end holds the pin captive and drives it straight into concrete, asphalt or soil
- Heat-treated steel construction stands up to repeated high-impact pin driving
- Applications: form pins, stakes, fencing and guardrail posts, grounding rods, survey markers
- Stocked by Crowder Supply in Denver across the pin size and shank matrix
Pin Driver FAQ
What pin sizes does it drive?
Nine socket sizes: 5/8, 3/4, 7/8, 1, 1-1/4, 1-1/2, 1-3/4, 2 and 2-1/2 in., with the 2-1/2 in. size supplied as a two-piece driver.
Will it fit my paving breaker?
If your breaker takes 1 x 4-1/4, 1-1/8 x 6 or 1-1/4 x 6 in. hex steel, yes order the shank that matches your chuck, and the socket end takes care of holding the pin.
Can it drive ground rods and guardrail posts?
Yes grounding rods, form pins, rebar stakes, fence and guardrail posts and survey markers are the core applications. Which breaker to run it under is covered in the paving breaker buyer’s guide.
