The APT 190 is a 90 lb-class pneumatic paving breaker built for the heaviest handheld break-out work: full-section concrete, pile-cap demolition, full-depth highway asphalt and rebar-reinforced bridge decks. Consuming 80 CFM at 90 psi through a 3/4 NPT inlet, it strikes 1,350 blows per minute the heaviest hitter among the paving breakers & jackhammers stocked at Crowder Supply and the top of the American-made APT breaker line.

Feeding a 90 lb breaker takes air: pair the 190 with a towable unit from our air compressors sized for its 80 CFM draw, and keep pneumatic tool and rock drill oil in the line to protect the motor. Hex shanks of 1-1/8 x 6 in. and 1-1/4 x 6 in. run standard steels, and the buyers guide to paving breakers covers when 90 lb of tool earns its keep.

• 90 lb-class pneumatic paving breaker; 90 lb actual tool weight, 2931 in. overall length by model
• Air supply: 80 CFM at 90 psi through a 3/4 NPT inlet
• Impact rate: 1,350 blows per minute
• Hex shank options: 1-1/8 x 6 in. and 1-1/4 x 6 in.
• Applications: full-section concrete, pile-cap demolition, full-depth highway asphalt and reinforced bridge-deck work
• Made in the USA by American Pneumatic Tools with deep parts and service support
• Stocked by Crowder Supply in Denver with free UPS Ground shipping

APT 190 FAQ

What size air compressor does the APT 190 need?
It consumes 80 CFM at 90 psi through a 3/4 NPT inlet, so plan on a towable compressor delivering comfortably above 80 CFM to keep it hitting at full power.

What paving breaker steel fits the APT 190?
It is offered with 1-1/8 x 6 in. or 1-1/4 x 6 in. hex chucks, and Crowder Supply stocks moil points and chisels plus asphalt cutters and clay spades in both shanks.

Where is the APT 190 made?
American Pneumatic Tools manufactures the APT paving-breaker line in the United States, with deep parts and service support behind it.

Do I need a 90 lb breaker or would a lighter class do?
The 90 lb class earns its keep on full-section concrete, pile caps, full-depth highway asphalt and reinforced bridge decks; for sidewalk, curb and patch work a 30 or 60 lb breaker is easier on the operator.