The Atlas Copco TEX 40PE is a 90 lb-class pneumatic paving breaker for the heaviest handheld demolition: full-section concrete, pile caps, full-depth highway asphalt and rebar-reinforced bridge decks. The 93 lb, 29.5 in. tool consumes 85 CFM at 90 psi and strikes 1,110 blows per minute, while its vibration-reduced handle drops hand-arm vibration to about 4 m/s rare comfort at this end of the paving breaker spectrum.
An 85 CFM draw calls for a properly sized towable unit see our air compressors with pneumatic tool and rock drill oil in the line for the air motor. Hex shanks of 1-1/8 x 6 in. and 1-1/4 x 6 in. run standard heavy steels. The TEX 40 tops the pneumatic side of the Atlas Copco breaker range at Crowder Supply.
- 90 lb-class pneumatic paving breaker; 93 lb actual tool weight, 29.5 in. overall length
- Air supply: 85 CFM at 90 psi on standard construction compressed air
- Impact rate: 1,110 blows per minute
- Vibration-reduced handle drops hand-arm vibration to about 4 m/s
- Hex shank options: 1-1/8 x 6 in. and 1-1/4 x 6 in.
- Applications: full-section concrete, pile-cap demolition, full-depth highway asphalt and reinforced bridge-deck work
- Stocked by Crowder Supply in Denver with free UPS Ground shipping
