Impact Wrenches
An air impact wrench runs down and breaks loose fasteners that no hand tool will move, hammering the anvil instead of loading the operator’s wrist. Chicago Pneumatic keeps two separate families here. The industrial side handles plant, mine, and structural bolting: the 1 in./#5 spline CP0611, the 1-1/2 in. CP6135, and oil-bath twin-hammer tools like the CP6500. The vehicle-service side is built for tire bays, fleets, and general repair — the classic 1/2 in. CP734H and the 1,920 ft-lb CP7782 series. Drives run 3/8 to 1-1/2 in. square plus #5 spline and 7/16 in. hex, all at 90 psi maximum working pressure. Match impact sockets and adapters to the drive, compare the range on the CP air impact wrenches page, or step down to air ratchets for confined work. In-stock items ordered by 4 PM ET ship the same day.
Showing all 2 resultsSorted by popularity
$451.00 Select options This product has multiple variants. The options may be chosen on the product page
Price range: $224.00 through $227.00 Select options This product has multiple variants. The options may be chosen on the product page
Showing all 2 resultsSorted by popularity
Industrial Line or Vehicle Service?
CP draws this line sharply. Its industrial impact wrenches cover 179 to 18,400 ft-lb at 2,800 to 11,500 rpm free speed, 650 to 1,800 blows per minute, and 2.65 to 132 lb of tool. The vehicle-service line covers 75 to 2,500 ft-lb at 3,700 to 15,000 rpm and 1.17 to 35.7 lb. Structural steel, mill and mine maintenance, and flange bolting up to M56 or M72 — as on the CP6130 and CP6240 — belong to the industrial tools. Wheels, suspension, engines, and truck tires belong to the 7700 and 700 series.
Clutch Type Tells You the Joint
A two-jaw clutch, as in the CP6120, builds torque progressively and suits both hard and soft joints. A twin-hammer clutch in an oil bath is the hard-joint answer and needs less maintenance. Pinless rocking-dog mechanisms, used on the CP6910 and CP6920, keep vibration low at very high torque, and CP’s DYNA-PACT pin clutch runs in oil on the classic CP9541 series. For hazardous areas, the CP6728 composite range is ATEX certified and IP6 dust-proof.
Vehicle-Service Wrenches by Torque
On tire and fleet tools the number that matters is maximum torque in reverse — what breaks a nut loose. Forward torque is lower, and on the TL models deliberately capped.
| Model | Drive | Max torque | Build |
|---|---|---|---|
| CP7748 | 1/2 in. | 960 ft-lb (1,300 Nm) | Composite housing, twin hammer |
| CP7762 | 3/4 in. | 1,050 ft-lb (1,420 Nm) reverse | Ultra-compact, metal housing |
| CP797 | 1 in. | 1,400 ft-lb (1,898 Nm) reverse | D-handle, rocking dog |
| CP7769/CP7779 | 3/4 in. | 1,440 ft-lb (1,950 Nm) reverse | One-hand power and direction |
| CP7642 | 1 in. | 1,622 ft-lb (2,200 Nm) | Pinless closed clutch, 3 settings |
| CP7783 | 1 in. | 1,770 ft-lb (2,400 Nm) reverse | Lightweight D-handle |
| CP7782 | 1 in. | 1,920 ft-lb (2,600 Nm) reverse | D-handle, tire service |
| CP7782TL | 1 in. | 370 ft-lb (500 Nm) forward, 1,920 ft-lb reverse | Torque limited in forward |
Filter by drive size in the sidebar to see the rest of the range above, including the industrial 6000-series tools.
Air, Anvils & Sockets
Air inlets run 1/4 to 1 in. across the line; a 1-1/2 in. industrial wrench will starve on a 3/8 in. whip hose. Anvils come in friction-ring and pin-retained versions — pick by how often you change sockets and how much you care about a socket walking off. Impact-rated sockets, extensions and spline adapters and clean, lubricated air through swivels, hoses and valves do more for tool life than anything else.
Common Questions
I need a CP0611-D28H — is that on this page? Yes. CP lists the CP0611 series in D28H and D28L configurations of the same 1 in./#5 spline industrial wrench. Order by the full part number and we will confirm the anvil and handle before it ships.
What are the long CP numbers like CP7721-1089-0020? CP catalogs every configuration of a series — drive, anvil, kit contents — under its own item number. Send the number off the tool tag or an old invoice and we will match it to the current series.
Which wrench will not over-torque lug nuts? The torque-limited CP7748TL caps forward torque while keeping full power in reverse, and the CP7755 gives 11 forward power settings. Finish to spec with a torque wrench either way.
Is there a cordless version? CP builds cordless impact and torque wrenches on 12 to 36 V packs — see cordless and electric tools.